NV-UPS / 500 Elevator Brake Power UPS, Elevator UPS Elevator Control System

NV-UPS/500 Elevator Brake Power UPS, Elevator UPS

Quick Details:

1.The input wiring single-phase AC power
2.input voltage 220VAC 230 VAC 240VAC
3.the output terminal DC ()
4.Output Current DC110V/DC220V/AC220V
5.Output Current 4.5A
6.input frequency 50Hz/60 Hz
7.output power 500W (MAX)
8.the continuous output time of 4 minutes
9.overload capacity
　Load ≤105%, normal output;
　105% ~ 150% load, 10 seconds and then shut out output;
　Load> 150%, immediately turn off the output;
10.the battery nominal voltage 24VDC (12V/7Ah * 2)
11.the working environment temperature: 0℃~40℃
12.relative humidity
13.Altitude <1000m
14.storage temperature -25℃~+55℃
15.the machine size 260 *230 *150 mm
16.Weight 9.5Kg

Description:

NV-UPS/500 Series Brake device is used after the lift of a semi-automatic power cut loose brake release device.
For a room, no room for permanent magnet synchronous motor elevator Brake manually.
Brake devices rely on batteries outside the power grid to provide electricity after power failure the elevator brake release, slow to move to open the door to the elevator area to manually fast, easy and rescue capabilities.
Normal in the grid, press the power button input, electricity to charge the battery;
when the grid power failure, manual control by the start button or use the brake Brake button on the control cabinet, indirectly controls brake DC110V output.