Mode Conditioning Fiber Patch Cord, Multimode 50/125, 62.5/125 or OM3

Quick Detail:

1. Mode conditioning patch cord

2. MM 62.5/125, MM 50/125 or OM3 fiber type

Mode Conditioning Fiber Patch Cord, Multimode 50/125, 62.5/125 or OM3

Description:

A Mode Conditioning Patch Cord is a duplex multimode cord that has a small length of single-mode fiber at the start of the transmission length. The basic principle behind the cord is that you launch your laser into the small section of single-mode fiber. The other end of the single-mode fiber is coupled to the multimode section of the cable with the core offset from the center of the multimode fiber.

Gigabit Ethernet (GbE) requires a laser light source instead of an LED source to power the network, due to the lasers faster rise and fall times, the pulses of light injected into the fiber are more tightly packed together thus greater bandwidth. Without the use of mode conditioning patch cord, multiple signals are generated when a single-mode laser launch into the center of a multimode fiber. Multiple signals can be generated that overlap each other and make it difficult for the receiver to interpret. This condition is known as Differential Modal Delay (DMD). MCP provided the offset between the single-mode and multimode fiber that eliminates the DMD effect.

Features:

1. Compliant with IEEE802.3z

2. Well control of?DMD phenomenon

3. Low Insertion Loss (<0.5dB)

4. Rugged offset splicing closure

5. Available in MM 62.5 & 50um fiber

Specifications:

Competitive Advantages:

1. Work team with over 10 years experience of fiber optic patch cord producing

2. UL and RoSH certified cables and connectors used

3. Quick delivery time to support customer to win more business

4. OEM products available

5. 100% tested before delivery

Tag:

Fiber Optic Patch Cord, Fiber Optic Jumper, Fiber Cable Assemblies, Fiber Optic Pigtail, Zip Patch Cord, Mode Conditioning Patch Cord