C purlin machine 5

The Fast changeable C purlin machine rapidly changing standardization 
1.Fast changeable C purlin machine installation Standardization:
Fast changeable C purlin machine used to be a machine on the same die and six sizes of the lower mold, install the upper die and a lower die, the die wheel mounted directly on hexagonal bench, the upper die mounted on the slide Block bottom surface of the plate and place the appropriate thickness to ensure that the upper and lower 
mold clamping, the four peripheral gap uniform, equal to the distance between the upper and lower mold blank tile thickness. Then prevail over mold, table indexing, install the remaining five pay lower die, all installed in order to drive up and down mode after press-watts.
2.Fast changeable C purlin machine work standardization:
Fast changeable C purlin machine fed from the rear of the device, through a variety of roller pressed into a C-shaped steel sent from the head. The traditional process, C-shaped steel is required after pressing manually fixed length cutting, punching device and then transported to the size of punch according to customer requirements, the production can not be continuous, the efficiency is not high. After gradually improve the production process, and ultimately the whole process automatic control, dramatically improved production efficiency, increase customer equipment, technical content and added value. C steel is efficient and economical cutting surface profiles, cross sectional shape as reasonable, they can play a greater efficiency of steel, C-shaped steel machine rapidly changing improve CD bearing capacity.

\\

/czpur/72.html