Managed Fiber Switches

Managed Fiber switches with 2 fiber ports +8 UTP ports

OP-GY810 is a managed Layer 2+ industrial Optical Ethernet switch with two 100Mbps fiber optic ports and eigth 10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. OP-GY810' s high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. OP-GY810 also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial environment.
"Fast Ring Protection"(FRP) is a proprietary technology of Shenzhen First Mile Communications Ltd., designed specifically for industrial applications, to provide a fast Ethernet ring protection and recovery within 30ms. From the management console, uses can choose any port (normal Ethernet port or trunk port) to form an Ethernet ring for faster recovery and wider bandwidth.
Features

Fast Ring Protection (FRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
8K address table for auto-learned unicast addresses
4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
13 trunk groups of up to 8 member ports for flexible load distribution control and fail-over function
Manual, static and dynamic portStatic and dynamic port aggregation for bandwidth management
Port rate limit, broadcast storm control, port mirroring, rich Quality of Service (QoS) features for data traffic control and management
Blackhole MAC address filtering, static and dynamic MAC address management for network security
Access Control Lists(ACL)
Secure Shell (SSH) V2.0
802.1X
IGMP snooping
SNTP, SMTP
SNMP V1, V2c, V3
Supports RMON statistics, history, alarm and event
Web-based network management interface
Supports port and VLAN management
On-line firmware upgrade
Two privilege level accounts
Syslog
Dual power input for high reliability
DIN rail or panel mounting for easy installation
Performance

IEEE Protocol
802.3 10Base-T Ethernet
802.3u 100Base-TX and 100Base-FX fast Ethernet
802.3X Flow Control and Back Pressure
802.1p Class of Service
802.1Q VLAN Tag
802.3ad LACP
802.1d STP
802.1W RSTP
802.1X
Non-blocking store-and-forward shared-memory switch architecture
MAC address: 8K
Network management: Web-based, CLI
Fast Ethernet Ring Protection: Recovery time within 30ms
Firmware upgrade: Web, online
Port Configuration

RJ45 Port:
Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
100Base-FX Optical Port:
Single single-mode fiber, dual wavelength 1550nm/1310nm, SC/PC connector, 15/ 40 km reach
Dual single-mode fiber, single wavelength 1310nm or 1550nm, dual SC connector, 15/40/ 60 km reach
Dual multimode fiber, single wavelength 1310nm, dual SC connector, 2 km reach