- Nanjing Power Tools Co., Ltd
-
Shaoxing, Zhejiang, China
- Main products: oscillating multi tool accessories, reciprocating saw blades & jig saw blades
Home > Products > oscillating saw blade > oscillating multi tool saw blade
oscillating multi tool saw blade
US$ 0.75 - 0.75
/ Piece
1000 Pieces(Min. Order)
- T/T L/C D/P D/A
- 7 days
You May Like
Product Details
| Place of Origin | China |
Product Description
The Tools
| Oscillating tool blades | |
|---|---|
(universal mounting) | A narrow plunge cut blade for wood and plastics etc. Ideal for floorboard lifting, cutting holes for electrical back boxes in plasterboard etc. This one is a "Bi-metal" type that can be used on composites and some non ferrous metals. |
(universal mounting) | A wide plunge cut blade for wood and plastics etc. Uses as above - but for wider cuts. |
(universal mounting) | This is a wood and plastics cutting plunge cutting blade. This one has larger more aggressive teeth for fast cutting. These are best suited to cutting things that are well supported and fixed, like floorboards since otherwise they tend to just catch and vibrate the work! |
| A Sharp untoothed scraper blade. These are designed for getting under sticky stuff - scraping glue residue, or adhesive backed plastics off hard surfaces. | |
| A hook and loop sanding backing pad designed for the felt backed sanding pads. Note that unlike traditional delta pads these have a slight radius to each side that matches the arc of rotation of the machine. This enables you to sand right up to an adjacent surface with no risk of straying onto it, or hammering against an edge as you would with a traditional delta sander. | |
| A vented version of the sanding pad designed for use with vacuum extraction. | |
(universal mounting) | This is a depressed centre HSS segment saw for cutting woods, composite, and metals. The depressed centre will allow flush cutting, and the segment allows you to cut up to neat finish at an edge without the traditional overcut one associates with a circular blade. Note that one is better off using a round blade if this close cutting facility is not required, since the teeth near the segment will tend to wear first, and this is the most useful bit of the blade. |
(universal mounting) | This is a flat version of the above. The flat blade can't cut flush to a surface, but can in some cases cut a little deeper. These blades are often a little cheaper than the depressed centre versions. |
(universal mounting) | A circular HSS blade. Ideal for general cutting from any part of the blade. Note that since the tool does not rotate the blade in use, it is worth rotating it manually from time to time to spread the tooth wear around all the teeth. |
| Even broken blades can be worth keeping if the mounting part is still serviceable! | |
| A carbide edged segment saw. These are ideal for cutting ceramics, glass, cast iron and other hard materials. Particularly good for neatly cutting holes in the middle of tiles or tiles that are already fixed to the wall - say when cutting in electrical accessory boxes, or making access to shower valves. They are also very effective for removing old grout from between tiles. For even longer life, there are diamond versions of these available. | |
| The carbide rasp is also a very handy tool for tilers, It allows the quick and effective removal of old set tile adhesive for example. Combined with this and the carbide segment saw, removing broken or damaged tiles for replacement becomes very straightforward. The rasp is also effective at removing badly flaked old paint, or putty residue from window frames when re-glazing. Can be used on wood for coarse shaping, or for quickly removing rotten wood from window frames etc prior to filling. | |
Contact Us
- Nanjing Power Tools Co., Ltd
- Contact nameevan xu Chat Now
- Phone86-25-57470611
- Addressxiongzhou town, luhe district, Shaoxing, Zhejiang
Product Categories
| oscillating saw blade |
Popular Searches
- Carbon Brush
- Diamond Segment
- circle cutter
- Power Tool Accessory
- hcs
- Power Tool Spare Part
- angle grinder armature
- angle grinder carbon brush
- Copper Carbon Brush
- Silver Carbon Brush
- Power Tool Carbon Brush
- Replacement Carbon Brush
- chain saw oil pump
- segment
- diamond cutter
- gang saw segment
- makita power tools
- dewalt power tools
- oscillating tool
- oscillating saw blades
- Multi Tool Blade
- carbon brushes
- copper carbon brushes
- Block Cutting Segment
- Power Tool Part
- Carbon Brush Set
- Carbon Brush Replacement
- dewalt tools
- Drill Press Stand
- bosch power tools
Recommended Products
- KNE IKO high-precision micro guide rail LWL (F) series self-lubricating guide rail LWLC...3
- KNE IKO high-precision micro guide rail LWL (F) series self-lubricating guide rail LWL3
- KNE IKO high-precision micro guide rail LWL (F) series self-lubricating guide rail LWL2
- KNE IKO high-precision micro guide rail LWL (F) series self-lubricating guide rail LWL1
- KNE IKO high-precision micro guide rail LWL (F) series self-lubricating guide rail LWL1...Y
- KNE IKO high-precision modular cross roller linear guide CRWG2-30
- KNE IKO high-precision modular cross roller linear guide CRWG1-20
- KNE IKO high-precision modular cross roller linear guide CRWM1-50
- KNE IKO high-precision modular cross roller linear guide CRWM1-40
- KNE IKO high-precision modular cross roller linear guide CRWM1-30
- KNE IKO high-precision modular cross roller linear guide CRWM1-20
- Boron Carbide nozzle
Find Similar Products By Category
- Industrial Equipment & Components > Universal Hardware Parts
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Nanjing Power Tools Co., Ltd
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
evan xu
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile