Yellow wire 1M Talon Igniter+Falcon II igniters + fireworks igniter + satety igniter + best quality

Specifications

Fireworks Igniter

Introductions of the safely ignitions

This product is using the high-speed current to get through the resistance wire and make it hit then igniter the ignitions. When using the safely ignitions ,the firing system’s voltage can't be lower than 12v .And it is better when the firing system have the detect function. The operation procedures is as follows:

1.put the safely ignitions in the firing system. Secondly, using the firing system to check it.

2.Turn off the firing system, then put the firing ignitions in the end of the fireworks down-lead. But remember to leave 0.5cm down-lead out of the safely firing system.

3.Turn on the firing system, then move the power switch to the fire position.

4.Keep the distance out of 40-50m with fireworks, that you can press the remote control and then you can fire.

Attentions

1.If the firing system have the remote control, you must put it in the safe place. Don’t give it to the kids and don’t put it in your pocket, in order to avoid to pressing the remote control accidentally and hurt yourself or others.

2.The safely ignitions must put in the dry  place when you finished

Main performance parameter

Resisance:1.3~1.6 Ω

All-fire current:0.8A

No-fire current:0.25A

Operation Time:  <5ms

insulation Resistance: The minimum value is 50mΩ when the DC voltage is 500v

Some Parameters:

1. Packing: 20/100

2. Carton quantity: 2000

3. Carton demension: 42*27*33cm

4. Gross Weight:     17KG