Silastic RTV-2 Mold Making Silicone

Silastic RTV-2 Mold Making Silicone is general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 4-6 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion.

Applications of Silastic RTV-2 Mold Making Silicone :

Silastic RTV-2 Mold Making Silicone is primarily intended for resin ornaments, PU crafts, plaster moulding, gypsum decorations, unsaturated resin crafts, lighting and candles crafts, statue&figurines, relievo furniture, furniture decorative materials, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils, simulation landscapes, animals and plants sculpture, sandstone crafts, concrete stone mold, etc.

Features of Silastic RTV-2 Mold Making Silicone :

(1)high tensile & tear strength
(2) Low linear shrinkage
(3)free Curing agent
(4)brushing & pouring
(5) high duplication times

Procedures of  mold making by  RTV-2 silicone rubber

1.  Clean and prepare specimen (apply consolidant, sealant, or release agent if necessary).
2.  Build retaining wall around specimen.
3.  Stir silicone base to loosen any settled material.
4.  Decant desired amount of silicone into mixing container.
5.  Mix in appropriate amount of catalyst.
6.  Apply to specimen.
7.  If reinforced mold is desired, gently press in gauze after pouring fist layer.
8. When cured, gently remove mold from specimen.
9. If needed, create rigid backing or jacket over mold with plastic,
urethane foam, or plaster. 
10. Remove backing material and mold.   Store mold inside rigid backing.

Storage and Precautions of Silastic RTV-2 Mold Making Silicone:

RTV 2 Liquid Silicone Rubber for Molding is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.

Package of RTV 2 mold making silicone rubber

Part A base silicone: 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 800g/bottle, 1kg/bottle and 10kg/bottle

Professional factory of RTV-2 silicone:

We are manufacturer, and specialized in manufacturing different hardness, different viscosity silicone rubber series, we are competitive in price with good quality.

Should you have any question, please feel free to contact Ms Julie.

 
Skype:  julieszmc

MSN: julieszmc(at)hotmail(dot)com
MINGCHENG GROUP LIMITED