RF capacitance level transmitter

Overview
A32 RF capacitance with Level Meter can be solved most of the high-temperature, high pressure, corrosive liquid level measurement. It uses radio frequency capacitive technology and U.S. companies and PTFE chips made of insulating material. And the double flange level gauge, float level gauge, level meter, compared isotopes, it is a simple, durable and convenient instrument.
Characteristics:
Simple structure, easy to install.
Strong corrosion resistance, to do with PTFE rod probe.
High temperature, usually 200 ℃, the special can reach 1000 ℃.
High pressure, the pressure is 32MPa.

Principle purposes
If the probe rod and the container wall, as do two parallel electrode plates, as do the measured liquid medium between them, then a simple capacitor formed. When the liquid level rises, the capacity will increase, changes in the RF circuit will convert the analog signal output. Acids, bases, chlorides, organic solvents, liquid CO2, ammonia, PVC powder, gray material, oil-water interface, medicine and other liquid level measurement.

Selection Guide technical performance 
Range： 0-125～3000mm（Rod） 
Accuracy： 0.5% 
Power supply： 24VDC 
Output： 4-20mA 
Electronic part of the working temperature： -40-85℃ 
Protection： IP65 
Explosion levels： dIICT6
Please indicate the actual pressure： 
Example: A32C (150) 3K2N2IM5 PTFE rod length 1500mm flange 304 reference electrode at room temperature with display of the security 
Note: Selection will be made when ordering manufacturers of specific comments

Description of the project type spectrum 
A32 A32 Level transmitter

　　Probe type

　　ALan-type

　　BStainless steel