Home > Products > Stainless Steel Pipes > ASTM A213 T22 alloy pipe
ASTM A213 T22 alloy pipe
US$ 10 - 10
1000 (Min. Order)
- T/T L/C D/P D/A
- 7 days
You May Like
-
Seamless steel tubes in small calibers for high(low and medium) Pressure boilers and petro chemical industry
-
Seamless steel tubes for oil casing and tubing
-
Seamless Pipes and Tubes for Pressure Applications
-
Seamless steel pipes for project service
-
Seamless pipes for low and medium pressure service
-
Line pipes used in sour service environment
Product Details
| Brand Name | Sunny Steel | Place of Origin | China | |
| Model Number | ASTM A213 T22 alloy pipe |
Product Description
ASTM A213 T22 Standard covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes.
Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H.
These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. ASTM A213 T22 tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
ASTM A209 Through A213
Other standard specifications include the categories of A209 seamless carbon-molybdenum alloy-steel boiler and superheater tubes; A210 seamless medium-carbon steel boiler and superheater tubes and A213 seamless ferritic and austenitic steel boiler, superheater and heat-exchanger tubes. Piping wall thicknesses range from 1/2 inch to 5 inches. A213 grades also have the letter H or M assigned, which changes the composition and specifications for that series.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
Chemical Composition(%) for ASTM A213 T22 Low Alloy Steel
UNS Designation K21590
Carbon 0.05-0.15
Manganese 0.30–0.60
Phosphorus 0.025
Sulfur 0.025
Silicon 0.50
Nickel …
Chromium 1.90-2.60
Molybdenum 0.87-1.13
Vanadium …
Boron …
Niobium …
Nitrogen …
Aluminum …
Tungsten …
Other Elements …
Mechanical properties for ASTM A213 T22 Low Alloy Steel
Tensile strength(min) 415Mpa
Yield strength(min) 220Mpa
Elongation 30%
Delivery condition annealed
ASTM A213 Standard Scope
1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T91, TP304, etc. These steels are listed in Tables 1 and 2.
1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.
1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
TABLE 1 Chemical Composition Limits, %A, for Low Alloy SteelA Maximum, unless range or minimum is indicated. Where ellipses (…) appear in this table, there is no requirement, and analysis for the element need not be determined or reported.
B It is permissible to order T2 and T12 with a sulfur content of 0.045 max. See 16.3.
C Alternatively, in lieu of this ratio minimum, the material shall have a minimum hardness of 275 HV in the hardened condition, defined as after austenitizing and cooling to room temperature but prior to tempering. Hardness testing shall be performed at mid-thickness of the product. Hardness test frequency shall be two samples of product per heat treatment lot and the hardness testing results shall be reported on the material test report.
Referenced Documents (purchase separately)
Other ASTM Standards
A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A941 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
E112 Test Methods for Determining Average Grain Size
Contact Us
- Sunny Steel tubosacero
- Contact nameSum Xuu Chat Now
- Phone86-21-33780199
Product Categories
| Alloy pipes | ASTM seamless pipe | Forge & Fittings | New products |
| Pipe flange | Stainless Steel Pipes | Weldable components | Welded pipe |
New Products
-
ASTM A519 carbon and alloy steel mechanical tubing
-
ASME SA210 seamless tube
-
ASTM A53 Pipe,ASME SA53 Pipe
-
ASTM A199 Heat-Exchanger tubes
-
ASME SA179 steel tubing
-
ASTM A106 Carbon Steel Seamless Pipe
-
Heat exchanger tube
-
ASTM A192 superheater tubes
-
ASTM A513 Mechanical Tubing
-
ASTM Seamless pipes
-
Blind Flanges, BL Flange, BLRF
-
Figure-8 Blanks,Spectacle Blind Flange
Popular Searches
- copper tube
- Copper Ingot
- copper clad aluminum
- non-ferrous metal
- Copper Alloy
- hpmc
- micro fiber
- heater tube
- portland cement
- rapid hardening cement
- Hydroxypropyl Methyl Cellulose
- Copper Bars
- copper coil
- copper sheet
- copper rod
- brass rod
- brass copper
- copper pipe
- copper cathode
- Copper Round Bar
- Brass Bar
- Copper Flat Bar
- Copper Rod Bar
- Brass Round Bar
- Copper Ingots
- copper plate
- Brass Ingot
- Copper Pipes
- copper tubing
- copper bar
Recommended Products
- Sanitary Stainless Steel Hygienic Tubes/Pipes for ASME Bpe Pharmaceuticals Food Beverages Hygiene
- ASTM A554 AISI 201 304 Round/Square/Elliptical/Tube Stainless Steel Welded Pipe Sanitary Piping
- Stainless Steel Sanitary Pipe with 3A Standard
- Stainless Steel Pipe 304 Mirror Polished Stainless Steel Tube
- Premium 316L Stainless Steel Seamless Pipe for Sanitary Applications
- China Top 1 Stainless Steel Round Tube 1/8"-32" SS304 SS316L 310S Ect. Sanitary Smooth Seamless Pipe with ISO9001, ASTM A269, GB, En, AISI, JIS, DIN
- ASTM A333 grade 6 Gr.6 seamless steel pipes
- Baotou Steel 37Mn 34CrMo4 seamless steel pipes
- Pup Joint API Spec 5CT with Coupling for High Pressure Wells
- Slotted Liner for Geothermal Wells and CO? sequestration wells Well Completion
- 0.15mm 0.2mm 1mm Small Diameter Micro Pipe Stainless Steel Capillary Tube
- Customized SUS309s Bright Stainless Steel Polished Tube
Find Similar Products By Category
- Metallurgy, Mineral & Energy > Steel & Products > Steel Pipe & Tube
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Sunny Steel tubosacero
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Sum Xuu
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile