GD-508 Ash Content Tester

GD-508 Ash Content Tester

Brief Introduction:

The instrument is designed and made as per the national standard of People’s Republic of China GB/T508 Test Method for Ash Content of Petroleum Products. It is suitable to determine ash content in the petroleum products as per GB/T508. It could not be used to determine ash content in the petroleum products containing ash-forming additives (including additives containing certain phosphorus compounds), lubricating oils containing lead, and used engine crankcase oils.

Main technical specifications and parameters
(1) Resistance furnace
   1. Power supply: AC220V±10%, 50 Hz
   2. Rated power: 2.5 kW
   3. Heating range: ambient temperature~1000°C
   4. Controlling temperature: 775±25°C
   5. Temperature controlling device: thermocouple
   6. Temperature rising time: ≤60 min
   7. Furnace temperature uniformity: ≤15°C
   8. Ambient temperature: 5°C~40°C
   9. Relative humidity: ≤80%
  10. Furnace chamber size (mm): 200mm×120mm×80mm (L×W×H)
(2) Heating plate
   1. Power supply: AC220V±10%, 50Hz
   2. Rated power: 2.5 kW
   3. Heating mode: by three groups of heater. The power of each group is 0.8 kW. They can be used separately or at the same time.
   4. Height above sea level at working site: not higher than 1000 meter
   5. Ambient temperature: 5°C~40°C;
   6. Relative humidity: ≤ 80%
   7. Plate size: 450mm×350 mm
(3) Ceramic crucible
   Size: 50 ml, 100 ml