Powder Coating Line , Cyclone Second Class Recovery System

←The control box is used to install the control host of automatic gun and to facilitate centralized control.

←The function lack powder alarm and automatic return powder controller related to automatic spray is included.

←Each machine position in the cabinet can install a host of automatic guns or a function host related to automatic spray.

←The coarse oil-water separator is pre-installed in the cabinet.

←The forced heat dissipation function of filter is to ensure the safety of continuous work host.

← Famous brand motor,low noise and long-time use.

← Advanced system to separate the air and powder,and recover the good powder by powder return system.

← For the automatic line,one set of four-work positions booth just need install one set of Large cyclone and pulse recovery system

← Parameters:

12 units large cyclone recovery tower

2sets of 9units-rotor system

Filter QTY: 18

Valve QTY:9

Power of Fan:18.5KW

Air flow: 10000-12000m3/h

(4)Powder absorb pump

(5)Automatic powder sieving

←Power: ≤100W

←The powder absorb pump and automatic powder sieving are matched in use.

(6)Stainless Powder supply box

← Stainless steel will not pollute the powder

←It can supply multiple spray guns with powder simultaneously

← It can be equipped with automatic powder return system, return powder fall into the powder box through powder screen

←It can be equipped with powder position detector. When the powder of the box is less than the set value, it can emit signals of lack of powder

←It is equipped with magnetic sealing added powder and can powder in work.