Malaysia Lithium Grease High Temperature Grease Nlgi 2

Place of Origin	China
Model Number	EAJ 7000, EAJ 7000 EP Lithium Grease

Specifications: Eaj 7000 lithium grease/eaj 7000 EP lithium grease is a high performance multi-purpose lithium based grease suitable for a wide range of industrial and automotive applications. It is engineered to provide a long service life in a broad range of applications. Eaj 7000 lithium grease/eaj 7000 EP lithium grease is fortified with a multifunctional polymer, rust and corrosion inhibitors to give protection for a wide range of applications and service conditions. Eaj 7000 and eaj 7000 EP lithium grease has good oxidation resistance. Eaj 7000 lithium grease/eaj 7000 EP lithium grease is recommended for industrial machineries, rolling element bearings in steel mills, quarry, marine, agricultural, mining, construction machinery, drilling, conveyors, elevators, chains, pulleys, cranes, shafts, automotive applications etc. The lubricating ability of eaj 7000 lithium grease/eaj 7000 EP lithium grease is formulated from medium vi base oil to meet and exceed manufacturer equipment specifications. It is compatible with most conventional greases. Eaj 7000 EP lithium grease is fortified with extreme pressure additive for good lubrication under high load. The EP chemical reaction will form a film strength/sealant properties to prevent metal to metal contact. Whenever two greases with different thickener systems are mixed in service, there is a possibility of incompatibility resulting in poor performance. As such, it is always preferable and advisable to clean the old grease from the bearing prior to using eaj 7000 lithium grease/eaj 7000 EP lithium grease. After bearing surfaces are cleaned, they should be lubricated/wiped with eaj 7000 lithium grease/eaj 7000 EP lithium grease and properly stored to prevent corrosion. Chlorinated solvents should not be used because they can leave chlorine, which can cause corrosion. Proper lubrication is achieved by using the correct amount of grease. Too little grease in the bearing causes premature failure. Usable temperature range for continuous service is negative 20 o c to 130 o c ( negative 4 o f to 266 o f). With frequent relubrication up to 163 o c (325 o f). Nlgi grade 0, work penetration at 25 o c,375 Nlgi grade 1, work penetration at 25 o c,330 Nlgi grade 2, work penetration at 25 o c,285 Nlgi grade 3, work penetration at 25 o c,235