IEEE 802.3 E1 fiber Ethernet Loop ETH Optical Modem Protocol Converter

Overview:?

Ethernet fiber modem is to modulate Ethernet signal of 2, 048kbps to single or multi-mode fiber. The fiber for transmit data can be used to monitor and control local and remote devices, and no collision will occur, user can chose the type of commonly fiber wavelength and interface .It can used with E1 fiber optical modem and transmit by ATM or DD

Main features:

◆ Based on self-copy right IC;

◆ provide 2 types of clock: fiber reconvery clock, master clock;

◆ Ethernet interface 10M/100M , Ethernet port supports full/half duplex, support VLAN proposal

◆ Ethernet support AUTO-MDIX

◆ Provide loop-function : Fiber local loop back by itself , Ethernet loop back by itself

◆ Ethernet monitor can reset by itself , it won\'t die

◆ Has PBRS Code testing function , and could be used as a 2M error code divice

Technical specifications:

◆ 10/100Base-T Interface
rate : 10M/100M , supports full/half duplex adapt;
proposal: support IEEE 802.3 , IEEE 802.1Q(VLAN)
MAC address form: Can learn 4096 types of MAC address
Totol Memory Sizes:64MBits SDRAM
physical interface : RJ45, support AUTO-MDIX

Dimension
210mm ( w ) *140mm ( l ) *30 mm ( h )