Reinforcing Mesh Machine

Function features:air cylinder drived type
This kind machine is our latest developed reinforcing mesh welding machine. The line wire and the weft wire are pre-straight and pre-cut. The line wire is feeding by the servo motor ,pulling the wire net by the servo motor auto. The welding power comes from the cylinders. Its easy to control the welding pressure . The weft wire feeding from the multi hopper which capacity is more over ten times than the traditional hopper. The new machine added the bear wire net and carry equipment that makes the working more convenience . The welding part is used the springiness input wire trunking that makes the welding copper use for long time. This machine adopts synchronous control technique. The cent-control and welding time are composed of PLC program system. The input front-panel is touch screen , the operate is more intelligent and reasonable.
Main technical parameters:
Wire diameter
    
5.0-12mm
    
Line wire form
    
pre-cut wire
Weft wire distance
    
Mini 25mm
    
Weft wire form
    
pre-cut wire
Line wire distance
    
100-300mm
    
Rated voltage
    
380V
Welding net width
    
2500mm
    
Rated power
    
140KVA X 12
Welding speed
    
25times/min
    
Overall dimension
    
24 X 6.0 X 2.65M
line wire No.
    
24
    
Length wire net
    
6000mm
Products & Application:
The welded mesh can be used in the floor & wall reinforcing mesh in the building, reinforcing mesh in the tunnel, bridge and road