4+1 axis servo CNC press brake

Brand Name	hudong		Place of Origin	China
Model Number	WF67K-100T/3200

Electro- Hydraulic Servo Synchronous CNC Press Brake
Standard with DA65W (4+1)axis (Y1,Y2,X and R+V )
Y1 Y2:Left and right cylinders
X: back gauge before and after run
R: back gauge up and down run
V: mechanical compensation
1 Using UG (finite element) analysis, through computer aid design, with nice appearance.
2 The machine structure is welded with steel plate, with sufficient strength and rigidity. The hydraulic drive prevents the machine from serious overload operation accidents caused by the change of sheet thickness or bad choice of lower die cavity. Additionally, this machine is also featured by the steadiness of work, convenience of operation, and reliable safety.
3 The mechanic block is equipped in the oil cylinder to ensure the fixing accuracy when the slider travels to the bottom dead point and so as to assure the consistency of bending angle in bulking production.
4 Using German technology to eliminate internal stress.
5 Entire frame using striking grit to get rid of rust and spout anticorrosive paint.
Nominal force KN 1000
Bending length mm 3200
Distance between columns mm 2800
Slider strokes mm 150
Max opening height mm 460
Throat depth mm 320
Main motor power KW 7.5
Dimension (L×W×H) mm 3700*1400*2400
Machine weight  kg 7500
Machine accuracy Slider repeat accuracy mm ≤±0.02
 Slider position accuracy mm ≤±0.02
 Back gauge repeat position accuracy mm ≤±0.02
 Straightness of workpiece mm 0.3 / m
 Bending angle deviation ′ <±30
 Grating resolution mm 0.005