3 - 19mm Wind Load, Thermal Stress Heat Strengthened Glass With Holes Or Cutouts

3 - 19mm Wind Load, Thermal Stress Heat Strengthened Glass With Holes Or Cutouts

Description:

Wind load, thermal stress. Bring it on.

Heat-strengthened glass is less prone to spontaneous breakage than tempered glass. And it\'s the product of choice, with the exception of instances where tempered glass or laminated glass is required by law, wind load, local or national building codes.

Guardian heat-strengthened glass can be with holes or cutouts to process into Guardian heat-strengthened laminated glass, Guardian heat-strengthened insulated glass, etc.

Applications:

Suitable for use in spandrel and / or vision areas where added resistance to wind load and thermal stress is required. ?

Laminated solariums ?

High wind load areas ?

Laminated skylights

?

Specifications:

Thickness: 3-19mm

Available color: clear, bronze, blue, green, grey, black, etc.

Max specification:

Flat heat-strengthened glass: 3000*8000mm

Bent heat-strengthened glass: 3000*5000mm, R=1500mm

?

Competitive Advantage:

Approximately twice the mechanical and thermal strength of annealed glass of equal thickness. ?

Greater resistance to thermal loads than annealed glass. ?

Heat-strengthened glass is not a safety glass product.

?

Quality Standards
GB 15763.2, Chinese standard.
EN 12150.1, European standard.
EN 12600, European standard.
ANSI Z97.1, American standard.
AS/NZS 2208, Australian standard.