5.5 kW 200-1800 Height H Beam Welding Line Assembling Machine with hydraulic system

? 5.5 kW 200-1800 Height H Beam Welding Line Assembling Machine with hydraulic system

l? H-beam size

H beam height?????? ?????200-1800

??? Web thickness???????? ???6-32

l? Flange width???????? ?????200-800

l? Flange thickness???????? ??6-40

l? Workpiece length????????? 4000-15000

l? Assembling speed????????? 0.5-6 m/min

l? Main machine power????????? 5.5 kW

l? Hydraulic station power??????? 11 kW

l? Hydraulic system working pressure16Mpa

The main machine is made of a gantry frame, a buck-boost beam, an upper cylinder and a base, a web and flanges automatically centering system, aligning equipment, welding torch fixtures, a main transmission mechanism and a conductive device.

The gantry frame is a door-type one, with four rectangular rails on the gantry column, through which the buck-boost beams can make smooth movements.

The upper press roller is fixed on the up-down press beam, pressed down on the workpiece by the push of upper press oil cylinder. The material of the roller is 35CrMo, which precision and abrasion resistance improves significantly after heat treatment and the grinding machining.

The base is steel plate welded frame type structure, the two side walls of the base install a flange and web automatically centering device, which installed holes are made by machine, which ensures the precision and reliability.?

The flange and web automatically centering device is a key component of assembling machine; its structure determines the processing precision and efficiency of the assembling machine. The assembling machine made in our company adopts hydraulic drives and the structural principle of centering both sides simultaneously, i.e. the flange and web centering device installed on both sides of the wall moves to the middle by the driving of the hydraulic system, automatically clamping flanges and web of the H-beam together to the middle position, which significantly improves the working efficiency, and also makes the operation easier and more convenient.

Aligning device mainly plays the role of aligning the ends of flange and web, and meanwhile the wheel on the aligning device can support the flanges, eliminating the welding line welded by welding machine between the flanges and web.

The torch fixing device is mainly used for fixing and guiding the welding torch in order to keep a rational distance between the torch and the seam. The hydraulic cylinder on the torch fixing device can drive the weld torch close to or away from the seam to achieve the automation of the process of assembling.

?The main driving mechanism is driving by the motor and cycloid pinwheel reducer through jointer and the turning speed of motor is controlled by the inverter, so that stepless speed adjust can be realized. The transmission speed is controlled by the PLC programmable controller, which can achieve automatic exchange between spot-welding speed and no-load running speed. The main driving roller corresponded with the upper press roller, is made of 40Cr, which precision and abrasion resistance improves significantly through heat treatment and grinding.

A conduct device is installed on the inferior-side of the main driving roller, and it is made of a carbon brush, copper cables and fix device. The Brush directly contact with the surface of the main drive roller directly, conducting the welding current of the workpice to the base in order to avoid the burning when the welding current flows through the bearings.

Draw-bar box centering system is mainly used to centre the flanges and webs initially, which consists of one drive draw-bar box and two idler one. Inside the box, there are one set of flange centering device and one set of web centering device, and the draw-bar boxes are driven by the two hydraulic cylinders installed behind the two boxes. And the two boxes transmit power and link with each other through the rod between them.

The input and output roller conveyor are made of rollers and frame, the two input roller conveyor and two output roller conveyor close to the main machine are driven by the chain linked with the main transmission roller, which ensures the linear speed of the roller and roller conveyor coming in line with the main driving roller.

The Hydraulic system controls the up and down of the press roller, the welding gun and the aligning device,