dry magnetic separator, dry magnetic separator, wet magnetic separator. Iron ore benefication equipment

Brief introduction of magnetic separator:

Magnetic separator refers to a kind of equipment which select according to the magnetic difference between the ore and the barren rock. There are mainly three kinds of magnetic separators. And they are wet magnetic separators, dry magnetic separators and strong magnetic separators. Magnetic separators with fixed magnetic drum can be applied to the wet separation of fine strong magnetic ore while they, also, can be used to remove the strong magnetic mixture ore from the non-magnetic ore. This kind of magnetic separators can be feed and discharged continuously with its intensive magnetic field, big work clearance and large treatment capacity.

The working principle of magnetic separator:

The strong magnetic ore is adsorbed to the surface of the drum while the weak magnetic ore and non-magnetic ore are flicked off when the ore pulp enters into the magnetic field. The strong magnetic adsorption on the drum surface revolves with the drum and is brought from the magnetic field. Finally it will be crushed into fine ore bunker finishing the separation. Three kinds of cell body, that is to say, CTS, CTN, CTN, can be adapted to one drum to different separation requirements. Downstream cell body is used in the separation of the coarse and fine ore 0-6mm and the counter-current cell body is used to separate the coarse and fine ore from 0mm to 6mm and to recycle the heavy-medium in the coal industry while the semi-counter-current cell body is used in separation of the coarse and fine ore from 0mm to 0.5mm and esp. the separation of the fine ore from 0mm to 0.15mm.

Main technical parameters: