Metal Stud Roll Forming Machine, Wall Angle Roll Forming Machine with Hydraulic Station

Metal Stud Roll Forming Machine, Wall Angle Roll Forming Machine with Hydraulic Station

Ⅰ:Composition of machine

Roll forming main machine……………………………1 unit

Manual de-coiler…………………………………… …1 unit

Control panel…………………………………………..1 unit

Hydraulic station…………………………………… …1 unit

Manual out table……………………… ……………….2 unit

Spare tools……………………………………………...one box

Ⅱ: Details of each composition

A: Roll forming main machine

1: Coil width: depend on customer profile

2: working speed: 12m—15m/min (not contain cutting)

3: roll station: 8stations

4: material of roller: Gcr15 steel, polished and coated with chrome HRC58-62℃

5:material of main shaft:45﹟forge steel?? diameter roller: Ф56mm

6: main power: 5.5kw????

7: forming thickness: 0.5mm—1.5mm mild steel

8: Transmission: by single line 1.0 inch Chains

9: size of machine: about 4500 x 800 x1200 (L x W x H)

10: weight: about 4000Kgs

11: color: blue and yellow (it is also can changed depend on customer request)

12:? Cutting:

(1)?? machine adopt hydraulic cutting

(2)?? Cutting after forming: Cut the sheet after roll forming to required length

(3)?? Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(4)?? Material of blade: CR12with heat treatment

(5)?? Length measuring: Automatic length measuring

(6)?? Tolerance of length: 3m 1.5mm