Insulated Glass aluminum spacer production line,high frequency welding production line for aluminum spacer

Insulated Glass aluminum spacer production line is advanced technology, superior performance, and high cost performance, production speed more 120 M/Min. The model of aluminum spacer include: 6A,9A,12A,14A,15A,16A,19A,20A.

1.      Aluminum spacer has been widely used in energy-saving window and door. Our chopped wave type high frequency power supply has advantage in energy-saving and reliability, some company has adopted it.

2.      process flow: Uncoiler - loading - forming -high frequency welding - scraper - sizing - straightening - flying saw - lay off table.

3.      Composition of production line: Uncoiler, tube mill, solid state high frequency welder, straightening and shaping machine, flying saw.

4.      High frequency welder use chopped wave type high frequency power supply, welding speed 100-120 M/Min.

5.      The requirement of aluminum spacer:

A.     Wall thickness: Wall thickness must between 0.2-0.35mm, the maximum deviation is±0.025mm.

B.     Curvature: Spacer should no hard bending and side bending (beside bending radian of free droop).

C.    Appearance: Surface is flat and smooth, no bump, pore uniformity and orderliness.