Carbon Steel Tee Cold Formingmachine

Model

Ф2″

Date

6^th Jun

Term of validity

90 days

Lead time

60 Days

Size L*W*H m

2-2-2

Weight

4.5 T

Working scope

Can make carbon steel equal diameter tee 0.5-2 inches

Cost

(EXW)

19,000USD

We’d like to assist to handle the export and to deliver the goods to Tianjin Xingang port, The buyer pay us for all the charges.

The Main Technical Parameters of The Machine

1. Cylinders :

a.the upside cylinder(*1): inner diameter 340mm with a trip 400mm, nominal pressure:28Mpa

b.the side-cylinders (*1):inner diameter 320mm with a trip 150mm ,nominal pressure:28Mpa

c.the ejection cylinder(*1):inner diameter 80mm with a trip 200mm , nominal pressure:28Mpa

the thrust of the upside cylinder:250tons

the thrust of the side-cylinder:220tons

the thrust of the upside cylinder:10tons

2  pump station:63Scy-plunger pump :1 set  22KW Motor:  1set  electric valves manipulations,

water flooding pump:1 set

3  main engine frame: welded of 35 mm medium plate.

The scope of supply

1. The frame for the main engine: 1 parts(cylinder:4 pieces  with 2 blocks of T shaped slide block)

2. The hydraulic pump station: 1 set(63Scy-plunger pump :1 set. 22KW Motor:  1set, )

3. water pump 1 set , oil outletting valve ,  High-pressure oil watch:1 piece,

 oil out-letting valve 1 piece.

 The purchaser should prepare

a. mould(tee tires, the rod for the push head, rod seat)

 b. hydraulic oil

 c. connecction wire , water pit

After-sales service

 When the machine arrive your factory, the water, electric prepared well, then we would send our technician to direct to install until the machine works.(accommodation supplied by the buyer and the buyer should offer the installing tools.)

 We are responsible for the repair in one year after the machine out of our factory, in the first 6 months free for all (except the human factors); in the last 6 months, the buyer would bear the payment of the parts, we repair for free. 

Payment terms

30% advance payment by T/T before the production,

65%  by  T/T  before  goods  delivery. 

5%  by  T/T  after  installation  and commissioning.