Washing enduring and hot melt bronzing pulp

Washing enduring and hot melt bronzing pulp

This type of pulp is mainly applied in foil printing process; suitable for printing on 
cotton, T/C fabric and knitted textile.

Characteristic: Soft hand feeling, good fastness, not sticky; Suitable for heat-free foil printing.

Components: Acrylic resin PH Value: 6.5-7.5 Appearance: Beige transparent pulp Eco status: Eco-friendly

Process: foil free printing for 3 times----naturally dry or blow dry----cover foil paper on the surface---- use the good fluid pigment binder to squeegee the mesh for 4-5 times by harder oil scraping cutter----peel off the foil paper----naturally dry for 8-12 hours----overheated around 130-140 centigrade for 2 minutes. (Or pressing around 130-140 centigrade for 10-15 seconds)---can pass 60 centigrade washing test 2hours for 2 times.

Remarks: 800-1000 mesh is recommended. Attention: 1. In high moisture or low temp weather, 
please extend the drying time to make sure printing completely dry. 2. This paste is 
for single system, other catalyzers are not allowed to be added. Otherwise it will affect 
the elasticity and adhesion 3. Make sure completely dry before washing test.

Our company, Tianzhu Printing Material Co., Ltd., is professional in producing all kinds of textile printing material, including: white adhesive pulp, swim suit pulp, bronzing pulp, imitating bronzing pulp, flocking pulp, flocking paper, printing adhesive, printing assistant, straight cracking pulp, tortoise cracking pulp, hot stamping foil, gold powder pulp, foaming pulp, pearl pulp, suede pulp, printing tool, printing machine, etc.
Contact person: Ms. Hu (Sales manager)
Company address: No 1, Bowen Road, Humen Town, Dongguan City, Guangdong Province,China
Telephone number: 86-769-85568186
Fax: 86-769-85568186
Mobile phone: 86-18902618796
MSN: TZ8090@hotmail.com
QQ: 2521925296