Roland egx-350 desktop engraver

Model

EGX-350

Table size

305 (W) x 230 (D) mm [12 (W) x 9.1 (D) in.]

XYZ-axis travels

305 (X) x 230 (Y) x 40 (Z) mm [12 (X) x 9.1 (Y) x 1.6 (Z) in.]

XYZ-axis drive system

Stepping motor, 3-axis simultaneous control

Operating speed

X and Y axes: 0.1 to 60 mm/sec. (0.004 to 2.4 in./sec),
Z axis: 0.1 to 30 mm/sec. (0.004 to 1.2 in./sec)

Software resolution

0.01 mm/step or 0.025 mm/step (0.0004 in./step or 0.001 in./step)

Mechanical resolution

X and Y axes: 0.0025 mm/step (0.0001 in./step),
Z axis: 0.00125 mm/step (0.0005 in./step)

Spindle motor

Brushless DC motor, maximum 50 W

Spindle speed

5,000 to 20,000 rpm

Tool chuck

Cutter holder, collet method

Loadable workpiece thickness

Maximum 40 mm (1.6 in.) or 38 mm (1.5 in.) when nose unit is used

Connectivity

USB (compliant with Universal Serial Bus Specification Revision 1.1) or serial (RS-232C-compliant)

Control command set

RML-1

Power requirements

AC 100 to 120 V ±10%, 1.3 A, 50/60 Hz (overvoltage category II, IEC 60664-1); or AC 220 to 240 V ±10%, 0.6 A, 50/60 Hz (overvoltage category II, IEC 60664-1)

Power consumption

122 W

Acoustic noise level

During operation: 60 dB (A) or less (when not cutting), During standby: 40 dB(A) or less (as specified by ISO 7779)

Dimensions

616 (W) x 591 (D) x 393 (H) mm [24.3 (W) x 23.3 (D) x 15.5 (H) in.]

Weight

34 kg (75 lb.)

Environmental

Temperature: 5 to 40°C (41 to 104°F),
Humidity: 35 to 80 % (no condensation)
Ambient pollution degree: 3 (as specified by IEC 60664-1)

Accessories

Power cord, depth regulator nose (nose unit), nose-unit retainer (retaining screw, spring), spare mounting screw (for the cutter holder), character cutter (diameter 3.175 mm), flat cutter (diameter 3.175 mm), wrench, solid collet (diameter 3.175 mm), solid collet (diameter 4.36 mm), hexagonal wrench, hexagonal screwdriver, handy panel, adhesive sheet, vacuum adapter for chip cleaning, Roland Software CD-ROM, Roland EngraveStudio™ CD-ROM, Roland Software Program Guide, Roland EngraveStudio™ Program Guide, and User's Manual