Industrial Steam Boiler flexibility dual fuel oil gas burners joint 50 microns

Industrial Steam Boiler flexibility dual fuel oil gas burners Ⅵ joint? 50 microns

Ⅵ Series co-burner gas

the structure and properties
?

Ⅵ series of joint oil and gas by the oil burner nozzle, fuel gas nozzles, and combustion air distribution channel devices and other components.
Refineries and petrochemical plants are generally grown residue oil (such as vacuum residue, atmospheric heavy oil, etc.) for liquid fuel. Residue oil is usually high viscosity, high-carbon low-grade residual fuel oil, it is difficult atomization and incomplete combustion, Ⅵ joint oil and gas burner series, the oil spray nozzles are used best steam atomization can be disabled residue atomized into droplets about 50 microns (Sauter mean diameter), well mixed with air in the case of complete combustion.

Ⅵ Series co-burner gas has the following main features:
1 applies to both the blast, but also for natural ventilation heat recovery system in uncompleted outage or for any reason, to ensure the furnace in the case of normal operation of natural ventilation.
2 sealed tight, and easy to operate and maintain.
3 operating flexibility, adaptability, with the current refineries and petrochemical plants and a variety of furnace operation and the level of self-control match.
4 their own energy consumption, compared with the original steam atomizing type Ⅲ joint oil and gas burners to reduce 40%, Ⅲ type 0.5 (kg steam / kg of oil), Ⅵ type 0.3 (kg steam / kg of oil); required wind down (≤ 25 mm water column), compared with high-strength burner (80-100 mm water column) and 70-75% lower power consumption.
5 furnace area noise, and can ensure that 85dB (A) below the furnace area of environmental protection requirements than 90dB (A) low-5dB (A) or so.