Stainless Steel Plates Air Heat Recovery Refrigerated Air Dryer Heat Exchanger

Stainless Steel Plates Air Heat Recovery Refrigerated Air Dryer Heat Exchanger

The heating surface consists of thin corrugated stainless steel plates that are compressed together to

form a plate pack. Channels are formed between the plates and the ports are arranged so the media

flows through alternate channels in full counter current flow. Media is directed by a brazed seal enhanced

with contact points to contain the media flow pressure. Convenient location of air in- and outlet on the same

side. Water is separated at the coldest point and then exits through a drain.

Features and advantages

Low energy consumption due to the very low pressure drop over the heat exchanger.

Excellent thermal performance.

Two combined heat exchangers, consisting of both the air to air heat recovery and air to refrigerant.

Integrated connection with heat recovery that requires no additional piping.

Convenient connection locations.

All refrigerant connections are on one side, air and water drain on the opposite side.

Stainless steel for reliability and long life.

Compact: The corrugated compressed plates significantly reduce the total air dryer size

Refrigerated?air?dryers?separate?humidity?from?compressed?air?by?cooling?the?air?in?an?evaporator.?This?cooling?

effect?comes?from?the?evaporation?of?the?refrigerant.?As?the?air?cools, ?it?looses?its?ability?to?hold?moisture.?The?

condensate?is?then?collected?and?removed?in?a?separator.

A?heat?recovery?air?to?air?heat?exchanger?that?reheats?the?air?to?ambient?temperature?is?in?the?dryer?for?optimal?

efficiency.

The?coldest?temperature?in?the?system?determines?the?\"dew?point\".?\"Dew?point\"?is?the?temperature?at?which?the?

water?vapor?in?the?air?starts?to?condense?in?the?water?separator.

This?is?normally?maintained?slightly?above?the?freezing?point?of?water, ?2-5?°C?(35-40?°F).

The?humid?air?enters?into?the?heat?exchangers?and?cools?down?in?the?air?to?refrigerant.?This?humid?air?then?moves?

into?a?separator?and?then?dry?air?is?preheated?in?the?heat?recovery?side.?The?total?air?side?pressure?drop?is?typically?

20-30?kPa?(3-4?psi)

Refrigerated?Air?dryer

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support