Energy Saving 50W 450 - 550 lm 12VAC / DC LED Ceiling Spot Bulb Lamps

Features

Equivalent?to?50W halogen?lamp

Most advanced LED source:Cree, Seoul, Edison.

80%~90% energy saving than incandescent lights

Pass 4000V hi-pot test (4000V at 5 seconds)

Pass EMC test

Lifespan 30, 000 hours (5 years)

No flickering

No RF interference

No UV radiation

CE & RoHS compliant??

Long life-span, small light decline rate

Applications

1. Recessed lighting, shelf lighting, ceiling/wall coves
2. Cabinet and counter lighting, office lighting

3. Back lighting, step lighting, light boxes
4. Merchandising, exhibition stands, and panels

Packaging & Delivery

?Quality Warranty

3?years warranty and round trip shipping cost we bear for the failed lamps, after-service and technical support.

These led bulbs are our most stable, reliable and mature product, till now, they have no any complaint of quality.

Now they sell well in Western Europe and Asia. You will find it also be salable in your market.

Product Use

Connected to AC220V, the power can be screwed on(Note: This light is easy to use, regardless of the zero line and the live line, can be arbitrary connected with 220V Voltage)

Consider the following when selecting transformers for use with AS001 LED Lamp.

- AC12V Magnetic Transformer:?

The LED bulb is compatible with magnetic transformers used with 12V halogens; however, magnetic transformers are heavier, less efficient, and make noise. Under 12VAC condition, AS series MR16 LED can only present 90% lighting comparing the condition under 12VDC.

- AC12V Electronic Transformer:

The LED bulb is not compatible with electronic transformers or electronic-magnetic AC 12V due to the output section of this kind of transformers are not stable. Besides, some electronic transformers require a minimum load higher than 5~10Watt in order to work properly. - Symptoms of incompatibility include: no light output, flickering, strobe and randomly shutdown.

- DC12V Power Supply:

AS001 can perform highest brightness and power efficiency under DC12V power supply.

Note

1. Cut off the power before installation to prevent electric shock and provide the power supply;

2. According to the number of products need to be installed, then design and provide the power supply;

3. The light should be avoided installing in the heat source and hot steam, corrosive gases place so as not to affect the life span;

4. Be avoided touching the surface of the lamp when it is at work;

5. Products use high voltage (110V or 220V) power light cup, should not work in the frequent pass power state, it will affect its life.

Our service

1. Your enquiry related to our products or prices will be replied in 24 hrs.

2. Well trained and experienced staffs to answer your enquiries in fluent English;

3. OEM&ODE any your customized lighting we can help you to design and put into products.

4. After-sales service

Prod