Multifunction Process DMM and Loop Multimeter Calibrator 24 / 30mA

High Accuracy Digital Process Calibrator:

? DMM and loop calibrator in one tool with the Measurement, source output, analog output and loop power mode process calibration multimeter
? Clear LCD display with backlight; 3, 999 counts (29.999 counts for DC Current)
? With HART? (Measurement, process parameters, device configuration, calibration, access diagnostic information via HART protocol)
? 1000V overload protection on V,ohms and frequency.
? 25% Manual Step plus Auto Step and Auto Ramp on mA output.
? Precision 1000V, 400 mA digital multimeter
? 0.1% DC voltage accuracy
? 0.05% DC current accuracy, 1uA resolution
? Simultaneous mA and % of scale readout
? True RMS AC voltage measurement to 1 kHz
? Min/Max/Average/TouchHold/Relative modes
*** Measure Function: AC and DC volts & current, resistance, frequency and continuity
? DC voltage: 400m/4/40/400/1000V±0.03%rdg
? AC voltage: 400m/4/40/400V/700V±0.8%rdg
? DC current: 40m/400/10A±0.05%rdg
? AC current: 40m/400/10A±0.8%rdg
? Resistance measurement: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ±0.1%rdg
? Frequency measurement: 0~50 kHz ±0.05%rdg
? Diode test and continuity beeper
***DC current source/loop calibrator :
? Current? source/simulator: 0~24mA ±0.05%rdg;? 0.001mA Resolution
? Loop Power Mode: 28V±5%
? Power:? Ni – MH? rechargeable? batteries
? Work Temperature: 0°C~30°C (relative humidity 0~80%); 31°C~51°C (relative humidity 0~50%)
? Storage Temperature: -20°C~60°C (relative humidity <=80%)
? Demension:? 200*100*40mm
? Weight: 600g

WARRANTY:?? one year

SPECIFICATIONS