4 axis CNC kit 4 NEMA23 165 oz-in stepper motor + 4 axis CNC controller board

1.  4 axis stepper motor driver board

CNC stepper motor driver board TB6560,the new chip TB6560AHQ of TOSHIBA, the max ouput peak current can reach to 3.5A , this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.

Features:

1. it can drive four axis,The 5^th axis expansion, to facilitate your needs 5-axis machining when working
2. With optical isolation and DCDC power supply isolation, the full protection of your computer parallel port and equipment;
3. Spindle relay output, easy to use software such as mach3 to control spindle start and stop
4. Semi-flow control functions, and effective to stop the motor when the current is reduced to a minimum
5. Interface with a fan, you can add fan under your choice.
6. With 4 way 0.8-3.5A (peak) rated output of two-phase adjustable-current bipolar stepper motor drive
7. Standard parallel port interface, support for MACH2, KCAM4 series software;
8. with limit switch,can connection 4 aixs limit switch
9. Support four microstepping ——1,1/2,1/4,1/16
10. 12—36V single switching power supply,microchips to use as a 5V power supply, stable and heat small

2. Stepper Motor

Technical Specifications

Part No.:   23HS6403

Frame Size:    NEMA23

Step Angle:          1.8 degree

Current:                2.5A/phase

Resistance:         1.3 Ohm/phase

Inductance:          4.2mH/phase

Holding torque:           110N.cm/11kg-cm     165 oz-in

Rotor inertia:       280g-cm2

Number of wire leads:     4

Weight:                 0.70 kg

Length:              56mm

Shaft : single shaft,6.35mm diameter,21mm length with flat length to end.

 Note:if you need double shaft pls contact us,we can produce.

RED           A+

GREEN      A-

YELLOW    B+

BLUE         B-

3.Switching power supply

250W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:24v/10A,single output switching power supply

 Package include: 

• 1 x 4 axis TB6560 Stepper Motor Driver board V type
• 1 x DB25 parallel cable
• 1 x Fan,4pcs M4 screw
• 4 x 23HS6403 stepper motor
• 1 x 24V/10A switching power supply
• English user manual for 4 axis driver board will send by email

Shipping

• Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately 
• We ship to worldwide!

      DHL/UPS      5-8 business days

      EMS          4-10 business days

• All items will be shipped within 1-3 business days upon receipt of payment

Payment

• We accept Credit card,bank account,moneybook,moneygram,etc,but the aliexpress not accept Paypal now(if you need paid by paypal pls contact us)
• Payment must be made within 48hours of the auction end time
• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

Problem&Feedback

• Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
• We are a new member in ebay now,and need understand both of sides
• Pls email us before you want to leave any negative feedback

Refund 

• When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos 
• Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost 

Contact us

• Welcome worldwide customer inquire and questions,we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again
• Customer’s satisfaction is very important to us.