500LPH Reverse Osmosis Device RO Water Filter System Replacement For Cosmetic Making

500LPH Reverse Osmosis Device RO Water Filter System Replacement For Cosmetic Making

Advantage:
LRO Reverse Osmosis Water?treatment ?firstly produced by Lianhe Company for such industries as cosmetics, pharmacy, food and electronics has been deeply favored by users for its stable water quality and simple operation. The system solves the troubles of frequent regeneration and cleaning during the use of ion exchanging water purifier. By adopting physical principle, it enables the water to pass the reverse osmosis film with a diameter of one ten-thousandth of a micron and separates impurities, ion, microbes and colloids in the water, so as to meet the water requirements in cosmetics, pharmacy, electronics and food industries.

Equipment configuration :

1.Pressure Pump
Material:Stainless steel
Model:5㎡/h
Quantity :1piece
2.Multimedia Filter
Material:Stainless steel
Model:1465
Configuration:Stainless steel pipes and valves
Filtering material:Quartz sand
Quantity :1set
Country of origin:America
Brand :Joint venture
3. Active carbon Filter
Material :stainless steel
Model :1465
Configuration:Stainless steel pipes and valves
Filtering material:Apricot shell Active carbon
Quantity :1set
Country of origin:America
4. Ultrafilter
Material:stainless steel
Model:D220×H550
Filter element :PP 20 inch 5pieces(3-5u)
Quantity :1set
5.RO system
Model :RO-500L
Country of origin:Assembling the imported parts

Configuration

(1)4 pieces BE-4040 low pressure Conposite membrane,4 pieces stainless steel tubes.
(2)1 piece High pressure pump , the model is QDL2-150,the type is vertical multistage pump.
(3)Stainless steel frame,stainless steel pipes,pressurization index is 25㎏/㎝2.
(4)Electric controller (Including 1 piece digital readout conductivity gauge,2 pieces flow gauge,4 pieces pressure gauge,1 piece PLC Controller,3 sets Pump control switch.
(5)PLC and Imported solenoid valve control the automatic flushing system(Automatically flushing 60seconds when the machine turn on,automatically flushing 60 seconds after the machine working 6 hours continuously )

The requirements of the machine operation

a) Raw water

1,Pressure of water-in ≥1.5㎏/㎝2

2,pipe diameter≥1″

3,Comductivity of the water-in≤300us/㎝

b) Voltage

Three phase and four wires 15A RCD

c) Size

2200×800×1800m3

Capacity and characteristics

1, Continuous water production without the need of regeneration ,reducing labor strength.

2, Automatically turn the machine off when it is short of water cause by the low pressure and full of water cause by the high pressure .

3, PLC microcomputer monitoring, flushing the reverse osmosis membrane af regular intervals.

4, Small in size ,low energy consumption,non-pollution ,no need regenerateion and meet the GB drinking water requirements.

5, 90% parts are imported , using the famous brand membrane to improve the stability and durability of the equipment.Power:2.2kw???Voltage:380V?three?phase?four?wires? Current:Max6A