Layout of Custom Made Modular Container Chalet - Portable, One Bedroom With Living Area

Layout of Custom made Modular Container Chalet - Portable, One Bedroom with Living Area

Description:

The overall size of a special single container house is 3m*6m.

As per the design, entering into the house, the left hand side is sleeping area and living area, the right hand side is bathroom area (3.6 sq meters). The gross floor area is 18 sq meters.

Distance between the couch and TV set is 3 meters which is wide enough.

No kitchen area, suitable for vacation only.

Applications:Suitable work as vacation cottage.

Specifications:

1．Dimension(mm)& Weight(kg)

I.???? Floor

Steel frame?????????????? - made from cold rolled, welded steel profiles, 4 mm thick

??????????????????????????????? - 4 corner casts, welded

??????????????????????????????? - 2 fork lift pockets (except 30’), distance 1200mm

????????????????????????????????? (Internal clearance of fork lift pockets: 240×80 mm)

??????????????????????????????? - Steel cross members, thickness=2mm

Insulation????????????????? - 100 mm thick rockwool

Sub floor?????????????????? - 0.5mm thick, galvanized steel sheet

Floor???????????????????????? - 18mm Plywood board

??????????????????????????????? - 1.8mm PVC floor

????????????????????????????????? Flammability class B1 - hardly combustible

????????????????????????????????? Smoke density class Q1 - low smoke emission

????????????????????????????????? Wear resistance factor: T level

II.?? Roof

??? Steel frame?????????? - made from cold rolled, welded steel profiles, 3mm thick

???????????????????????? ?????? - 4 corner casts, welded

??????????????????????????????? - steel cross members,thickness=2mm

Roof cover?????? ? ??????? - 0.5mm thick, galvanized steel sheet,

????????????????????????????????? 360 degree seaming at joint of roof panels

? Insulation??????????????? - 100 mm thick rockwool

?Ceiling???????????????????? - 10 mm chipboard (V 20), laminated on both sides, white

????????????????????????????????? The chipboard complies with the emission value E1

CEE connector????????? - sunken in frame on short end side

III.???????? Corner Post

??????????????????????????????? - Cold rolled 3 mm thick steel profiles

?????????