IVS Impulse Test System

Impulse Test Stand

Standard:

· ISO 6803 · SAE J 343 · SAE J 1405

Application:

IVS Impulse test stand is applied to performing the impulse/fatigue/life time test on automobile steering hoses, brake hoses, air-conditioner hoses, fuel pipes, cooling water pipes, radiator hoses, heater hoses, air filter hosse, turbo, Booster system hoses, engineering hydraulic hoses, aerospace hose & hose assemblies, other pipes or end fittings , heat exchanger , air conditioner, filters, etc

Technical data:

· Max impulse pressure: 70Mpa (Accuracy: 0.1Mpa)
· Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)
· Frequency: 0~1.5Hz (Depends on the total volume & physical character.
· Ambient temperature: Normal Temp or -40~150±3℃
· Medium temperature: Normal Temp~150±3℃ or -40~150±3℃
· Test pieces: 2-8 pcs (Depends on the total volume & physical character.
· Test medium: Hydraulic oil or DOT
· Pulsing cycles: >10 million cycles
· Test waveform: Basic Square Waveform, T Waveform, Triangle Waveform, Sine Waveform *(Optional)Mounting mode: 1800 or 900 (As per the standard)
· Dimension:3modules:
· PC console: customized size
· Power station: 1800mm×1200mm×1600mm
· Test Chamber:1500mm×900mm×1000mm

Features:

· Fully automated test stand with high speed data acquisition system.
· History screen and real-time display of pressure-time curves.
· Test data saved automatically when emergency or power down happens accidently.
· Multi-samples can be tested independently at a time.
· From the control theory to the quality, advanced electrical components guarantee high test precision and stability.
· IVS test software is programmable, stable and reliable.
· Automatic pressure maintaining reduced the working time of motor and pressurizing section, enhanced the stability, life time and pressure precision of whole testingsystem.
· Equipment features overpressure/overload protection.
· Auto stop testing when a rupture occurs, prevent the operators and equipment from damages to the utmost.
· Automatically drain the air off remained in the test specimen at the beginning of the test.
· Providing with various of fixtures to satisfy the connecting of hose and hose assemblies.
· Installing distance adjustable freely as per hoses'minimum bend radius and test standards.
· Impulse test with monflexing or without flexing. *(Optional)