Dye Sublime Inks for Litho Offset Printing FLYING FO-SA , Used on Cotton t Shirt

Dye sublime inks for litho offset printing  FLYING FO-SA

Dye sublime inks for litho offset printing  FLYING FO-SA was designed for offset printing . It was used on all kinds offset printing machine  such as single-color , dual-color and multi-color offset printing machine .Be adaptable to the demand for medium-speed or high-speed printing .

Strong Point of Dye sublime inks for litho offset printing  FLYING FO-SA  :

 1) This sublimation ink is safe for the environment and has no harm to skin . It does not belong  to corrosives .

 2) There is no accumulation of ink on the rolls and the number of machine washings is greatly reduced.

 3) Black is very intense and gives good coverage without domination of the other colours .

 4) With high printing performance and outcome .

 5) Have no skinning within 72 hours

Typical Uses of  Dye sublime inks for litho offset printing  FLYING FO-SA    :

Biking Jerseys, Team Uniforms , Fashion T-Shirts , Garments , Custom Roll Textiles , Flags , Banners , Tradeshow Booths and Displays , Casino Tables , Casino Chips , Surfboards , Skateboards , Snowboards , Skies , Custom Furniture , Interior Design , 3D dye sublimation applications , sublimation aluminum sheet , key rings , display products , plates , mugs , ceramic etc.

Use Method of Dye sublime inks for litho offset printing  FLYING FO-SA   :

 1)  The first part is very simple and resembles exactly to normal process of offset printing . Precisely in the same manner, we offset print the artwork (as mirror image) on the offset paper using sublimation offset ink .

 2) Put the printed paper on substrates,such as polyester and nylon fabric .

    After offset printing, put the printed paper on the surface of the substrates , and with printed   surface facing downwards on the surface of substrates.

 3) Put both the paper and substrates on the heat press.

     And heat ,time and pressure is applied using a heat press. The ink sublimates i.e. converts to  gaseous form and gets deposited "into" the surface, thus transferring image.

 4) Finally ,take out paper and fabric from heat press ,the final product will be born .