artificial stone making/extrude/extruding/injection machine

we are both the artificial stone sink making machines and artificial stone sinks manufacturer
if you buy the artificial stone sink making line from us,we will help you to set up the whole artificial stone sink making line in your factory,or you can send your technicians to our sinks making factory to learn all the sink making skills.

The details of the artificial sink making line are as follows,

1.automatic extrudes machine:38000USD

dimention:520x440x420cm

1)vacuum mixing system--two mixing tanks

2)mixed material(resin,stone powder,one chemical) feeding system

3)the other chemical(hardener) metering system and supply system

4)flow rate,pressure,liquid level monitor system

5)cleaning system

6)electrical control system

2.vacuum system:1880USD

1)vacuum pump:7.5KW

2)vacuum tank:1CBM(then can storage the vacuum pressure in the tank,the vacuum pump need not working all the time)

3.simple trimming machine(cutting machine:5.5KW):3600USD

4.oven house(heating house,the dimention is as you like),for 300x400x220cm,oven house:8600USD

you can make it smaller,for example:200x200x200cm,then cost 5600USD

5.manual polishing machine:60USD/set

6.moulds:80x60x45cm sink

with upper part and lower part

7.mould isolation material spray gun:55USD

8.automatic mixing tank(if you don't buy the automatic extrude machine,you can use this machine,and casting the material manually,it is also OK):2800USD

you can buy two of these machines,then can speed up the manual making

also,if the order of colored sinks,is small,there is no need to open the automatic extrude machine,use is mixing tank,and inject the materials manually is just OK.
--------------------------------------------------------------------------------------------------

The artificial stone sink making skills,such as follows,

1.how to connect the moulds to the extruding machines

2.how to connect the vacuum pipe from the mixing tanks to the vacuum system

3.how to connect mixing tanks to the extrude machine

4.how to mix the resin,stone powder,pigment and chemicals

5.what is the percentage of each chemicals(blue chemical,white chemical) and resin and stone(CaCO3:calcium carbonate) powder in the conditions of different weather

6.what is the time for the every step of artificial stone sink making

7.how to control the oven heating of extruded sinks

8.how to make the holes for the sink drain

9.how to trim(cut) the sink edges

10.how to make the polishing for the sinks

11.when to use Al(OH)3 or CaCO3 powders

12.how to keep the quality of the artificial stone sink

13.what is the time for the resin,stone powder and chemicals mixing and extrude

14.how to pack the artificial stone sinks

15.etc(other skills)

for more questions,please contact:

Skype:yeedshower

Email:yeedshower@gmail.com

Mob:0086-13867488227