Bidirectional IDE SATA Conversion Adapter

Bi-Directional?converter?for?Serial?ATA?and?Parallel?ATA.?This?Adapter?Does-it-All, ?

SATA?Hard?Drive?to?IDE?Converter?or?IDE?Hard?Drive?to?SATA?Host?Converter?This?is

a?bi-direction?converter?for?serial?and?parallel?ATA?translation.?It?includes?the?Serial?ATA

PHY, ?Link, ?Transport, ?and?Parallel?ATA?(application?layer)?controller.?The?Serial?ATA

physical, ink, and?transport?layers?are?compliant?to?Serial?ATA?1.0.This?converter?supports?

1.5GHz?data?rate.

Features

* Automatic Serial ATA 1.5 Gbps speed negotiation;
* With LED Indicated power;
* Chipset: JMICRON JM20330

* Serial ATA 1.0 Specification compliant
* ATA / ATAPI PIO mode 0 to 4
* ATA / ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s
* ATA / ATAPI LBA48 addressing mode associated with 2-byte sector count;
* Support Serial ATA hot-plug;
* Ultra low power consumption
* Work for both AC and DC couple between the transmitter and the receiver;
* Provide specified OOB signal detection and transmission;
* No software and drivers needed (except for Win98SE);
* Support Spread Spectrum Clocking to reduce EMI
* Support Partial/Slumber power management
* Provide adjustable TX signal amplitude and pre-emphasis level
* Slave support
?

System Requirement

* Windows98SE, Me, 2000, 2003, XP, Mac OS 9.x/X, or above;

Included

* 1 x IDE to SATA or SATA to IDE Adapter

* 1 x SATA cable

* 2 x Power cords

* 1 x CD Driver