IEC 60695-11-10(UL 94)Fire hazard testing to Plastics Material

IEC 60695-11-10(UL 94)Fire hazard testing to Plastics Material

Ecosafene Products Service Co.,Ltd have rich experience to provide IEC 60695-11-10(UL 94)Fire Retardant Test to  Plastics Material.

IEC 60695-11-10(UL 94)Fire Retardant Test to  Plastics Material - Principle

IEC 60695-11-10 Fire hazard testing - Part 11-10: Test flames -50 W horizontal and vertical flame test methods

IEC 60695-11-10(UL 94)Fire Retardant Test to  Plastics Material - Scope

IEC 60695-11-10:2013 specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W.

These test methods determine either the linear burning rate or the self-extinguishing properties of materials.

These test methods are applicable to solid and cellular materials that have an apparent density of more than 250 kg/m3, determined in accordance with ISO 845.

Two test methods are described.

Method A is a horizontal burning test and is intended to determine the linear burning rate of materials under specific test conditions.

Method B is a vertical burning test and is intended to determine whether materials self-extinguish under specific test conditions.

IEC 60695-11-10 Fire Retardant Test to  Plastics Material- relative standards

UL 94 Test For Flammability of Plastic Materials for Parts in Devices and Appliances
ISO 4589-2:1996＋A1:2005 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: ambient-temperature test
UL1581:2009 Reference standard fo electrical wires cables,and flexible cords VW-1(clause 1080)
IEC 60695-2-11-2000 (GB 5169.11) Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products
IEC 60695-2-12-2000 (GB 5169.12) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials
IEC 60695-2-13-2000 (GB 5169.13) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for meterials
ASTM D 2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

Web:/EN/firetesting/electrial/306.html
E-mail:info@ecosafene.com