Hydraulic bucking unit

 The product possessed some advantages.
a.High level automation and easy operation.
b.Two persons can accomplish the make-up/break-out of tools.
c.High pulling torque when making up.
d.Adapted to wide range diameter
e.Quick spinning and axial thrust
f.Do not need to change tong head while using.

1.Dynamo:Power 15KW   RPM  1460r/min
2.Hydraulic System:
Fuel tank capacity:630L 
System Pressure:Max.Working Pressure 20Mpa
Hydraulic Operational Control Console: Length×Width×Height: 1500×750×800mm
3.Break-out diameter Range:63-350mm
4.Spinning Mainframe:
Nominal break-out torque:5KN.m-250KN.m Nominal make-up torque:5KN.m-200KN.m
Six Cylinder Clamp speed:0.6m/min        Torque Resolution:0.2 KN·m
5.Break-out Mechanism:Max.Single Clamp Force:200KN  
6.Tailstock Pull and Push System(Resolution:0.2 KN.m):
Max.Thrust of Tailstock:180KN       Max.Pull of Tailstock:143KN
Oil Cylinder Stroke:0~1.5m      Speed of Oil Cylinder:0~6m/min
Pull and Push Track::Tailstock Track 7.4m
Support Unit:
Moveable Support Unit: two sets    Stock Support Unit: two sets   Spinning Bracket:one set
7.Spinning System:
Spinning Torque:2 KN.m~4 KN.m      Suitable Diameter:63~350mm
8.Bracket:All brackets take hydraulic bracket, we can control the rise and fall of bracket through the platform.
9.Fittings: Service Tool:1 set         Sealing Bonded Washer:12 sets
If you have different requirement, we will try our best make you content through mutual negotiation.