Fuel Pump Test Bench (TST-B)

Functions:

1. Map and check the curve of governor (Idle, part and full load)

2. Checking of the advance device in dynamics.

3. Measurement of each cylinder's delivery at any speed.

4. Checking of each cylinder's injection timing with static.

5. Measurement of rack travel at any speed.

6. Checking of the LDA.

7. Checking of Themechanical,pneumatic governor.

8. Checking of the vacuum capacity of governor.

9. Measurement of the internal pressure of distributor pump body.

10. Measurement of the reflux delivery of distributor pump.

11.Testing of the electro-magnetic valve of distributor pump.

12. Checking of the transfer pump and the sealing of injection pump body.


Main Features:

1. Quick view the characteristic vurve of governor in dynamics.

2. Test pump with the curve of governor.

3. Save time, save effort, rapid, audio-visual,accurate. It's a very good tool for specialist to test pump.

4. Computer(handbook of PC) measure and control.Standard computer and standard ports. Hard disk. Windows XP operating system, CD-Driver.

5. Four ways to adjust speed, hand, digital, programmed. 8 steps preset and slide.

6. You can set up test data of injection pump, and useit to control test bench.

7. You can set up database of governors curve.

8. You can compare the test curve with the standard curve of governor.

9. You can get a report of a tested pump.

10. Two control system. Computer and instruments. You can select one of them when you operatethe test bench.

11. Frequency variable speed controller, heigh

accuracy and reliablity.

12. Automatic test oil constant temperature control,

through the cooling and heating systems.

13.12V and 24V DC power supply. Vacuum device.

Main technical Data

1. Electricity: 380V, 50Hz, 3 phase or 220V, 60 Hz, 3 phase

2. Rated power: 10 hp, 15 hp, 20 hp, 25 hp, 30 hp

3. Max. speed: 4000 rpm

4. Speed control accuracy: 1 rpm

5. Max. tested cylinders: 12 cylinders

6. Selectable range of counting strokes: 0 - 9999 times

7. Oil tank volume: 40 ltr. / 60 ltr.

8. Oil supply pressure:low 0 - 0.4 MPa, high 0 - 4.0 MPa

9. Test oil temperature:

automatic control

10. Volume of measure graduates: 45 ml&150 ml or 45ml&260 ml

11. Air:-0.03-0/0-0.3Mpa.

12. Main shaft revolving direction:clockwise and anti-clockwise

13. Center distance (clamping bed to coupling center): 125 mm