Home > Products > New product > Addition Cure Molding Silicone
Addition Cure Molding Silicone
- T/T L/C D/P D/A
- 7 days
You May Like
Product Details
| Brand Name | Hongye Silicone Rubber | Place of Origin | China | |
| Model Number | HY-E642 |
Product Description
Application of Addition cure silicone rubber:
HY- E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding,for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Technique Data of HY-E642# molding silicone
|
Model |
HY-E642# |
|
Appearance |
Translucent |
|
Mixing Ratio |
1:1 |
|
Operating time (Mins 25°C) |
30 - 40 |
|
Curing time (Mins 25°C) |
120 - 240 |
|
Curing time (Mins 60°C) |
20 - 30 |
|
Hardness (A°) |
42±2 |
|
Density ( g/cm 3 ) |
1.08 |
|
Viscosity (CS) (Part A) |
30000 ± 5000 |
|
Viscosity (CS) (Part B) |
5000 ± 500 |
|
Viscosity (CS) (After mixed) |
10000 ± 2000 |
|
Tensile-strength( kgf /cm2 ) |
100 ± 20 |
|
Tear-strength (kgf /cm2 ) |
15 ± 2 |
|
Elongation-break(%) |
350 ± 20 |
|
Retractility(%) |
≤0.1 |
OPERRATING INSTRUCTION of HY-E642# addition cure silicon rubber
1. Stir part A and part B with right mixing ratio (1:1) evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Any further information required of addition cure silicone rubber, pls feel free to contact Ms Vicky
Mail: hyz(at)szrl(dot)net
Mobile: 0086-13751020433
Tel: 0086-755-89948013
Fax: 0086-755-89948030
Contact Us
- Shenzhen Hongye Silicone Co., Ltd
- Contact nameMs Vicky Lim Chat Now
- Phone0086-755-89948013
- AddressBuilding A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang District,, Jinhua, Zhejiang
Product Categories
| Addition cure silicone rubber | manual mold making silicone rubber | molding silicone rubber | New product |
| pad printing silicone rubber | potting compound silicone |
New Products
-
RTV Silicon Rubber for Casting Resins
-
Addition Cure Silicone Polyurethane Plaster Resin Toy Molds Making
-
Electronic Potting Silicon
-
RTV Silicone for Molds Making
-
RTV Silicone Rubber
-
RTV 2 Silicon Rubber for Soap Mold Making
-
RTV 2 Silicone Rubber for Gypsum Product Mold Making
-
RTV 2 Silicone Rubber
-
RTV 2 Silicone Rubber for Resin Crafts
-
RTV 2 Silicone Mold Making Rubber Materials for Plaster &resin Artwork Mold Making
-
RTV 2 Silicon Rubber for Resin Products
-
RTV-2 Mould Making Silicon Rubber
Popular Searches
- acrylic adhesif
- adhesive glue
- epoxy adhesive
- super glue
- super adhesive
- cyanoacrylate adhesive
- epoxy glue
- rubber adhesive
- wood glue
- water acrylic
- self adhesive
- pressure sensitive adhesive
- glue adhesive
- lamination adhesive
- silicone sealant adhesive
- water based adhesive
- acrylic laminating adhesive
- sealing adhesive
- silicone sealant
- construction adhesive
- glass sealant
- silicone adhesive
- neutral silicone
- pu sealant
- rtv silicone
- polyurethane adhesive
- polyurethane sealant
- silicone sealant metal
- polyurethane adhesive sealant
- neutral silicone sealant
Recommended Products
- Raw Material TPU for Aluminum Alloy Coating Adhesive
- Special Liquid Mold Silicone for Candles/gypsum Products, Easy Demolding, no Residue, and Rapid Curing at Room Temperature
- Figurine/resin Handicraft Mold, Liquid Mold, Silicone Rubber, Fine Texture, High Fidelity, Softness and Hardness Selectable
- Candle Model-specific Liquid Silicone Rubber Two-component AB Glue is Easy to Demold Without Bubbles
- High-elasticity Candle Mold Making Liquid Silicone Rubber Vulcanization at Room Temperature
- A Handcrafted Magic Tool for Candle Molds Made of Silicone Rubber That is Easy to Remove and Heat-resistant
- A Must-have for DIY Candles! The Liquid Silicone Rubber Mold Material is Easy to Operate and Demold
- Raw Material TPU Adhesive for T-shirt Pringing
- Anti-Yellowing High Viscosity TPU Adhesive Raw Material
- Anti-Yellowing TPU Pellets High Viscosity Polyurethane TPU Melt Glue Raw Material
- Solvent Based High-viscosity 3000-4000mPa.s TPU Resin Raw Material
- Raw Material TPU Adhesive for Textile Binder
Find Similar Products By Category
- Chemicals > Silicone & Silicone Products
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ms Vicky Lim
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile