Geothermal Ground Water Source Heat Pump With Cooling

How?it?works
There?are?three?important?elements?to?a?ground?source?heat?pump:?

1.The ground loop
This is comprised of lengths of pipe buried in the ground, either in a borehole or a horizontal trench. The pipe is usually a closed circuit and is filled with a mixture of water and antifreeze, which is pumped around the pipe absorbing heat from the ground. The ground loop can be:
?Vertical, for use in boreholes
?Horizontal, for use in trenches
?Pound/Lake installation

2.A heat pump
In the same way that your fridge uses refrigerant to extract heat from the inside, keeping a ground source heat pump extracts heat from the ground, and uses it to heat your home.

3.Heat distribution system
This consists of under floor heating or radiators for space heating and in some cases water storage for hot water supply.

Heat?pump

Type

GHP20/B-DNNNE

Dimensions, weights, connection?dimensions

Dimensions

HxWxD

960x600X600

Weight

kg

165

Refrigerant

Type

R410A

Filling?weight

kg

3.4

Permissible?operating?pressure

Mpa

4.2

Pipe?connector-hot?side

Inch

G11/2”

Pipe?connector-cold?side

Inch

G11/2”

Evaporator

Type

Brazed?plate?heat?exchanger

Condenser

Type

Compressor

1xScroll

Performance?Heat?pump

Heat?output