BUS system Intelligent Wired Alarm System CX-7448

Wired alarm system>BUS system Intelligent Wired Alarm System? CX-7448
Model:CX-7448

BUS system Intelligent Wired Alarm System CX-7448>Brief Description

1.200 groups user password.
2. LCD display
3.Support two-way communication
4.support GSM, network alarm

BUS system Intelligent Wired Alarm System CX-7448>Features

New Function
* Dual Serial Ports, access to wired and wireless keyboard.
* Support two-way communication, enable work with 8 dual-way wried keypad, 8 dual-way wireless keypad, 8 dual-way remote.
* support GSM and TCP/IP protocol, network alarm settings.
* dopt bran new 16 bit MCU.

Basic Function
* LCD display, convenient and flexible man and machine operation interface
* 8 zones which can be expanded to 240 zones, total 248 zones.
* The length of bus up to 2.0km (dia.1.5mm).
* Support 15 keypads, all the zones could be distributed to 8partitions which can be armed/ disarmed independently.
* 200 groups user password, 30 programmable zones.
* Many kinds of multiple zones expansion module:? 8 zones expansion module CX-7408; single zone expansion moduleCX-7401; dual zone expansion module CX-7402; 6 zones expansion module CX-; and detector with address code.
* Auxiliary output bus interface supports CX-7412, CX-32B relay output module and another accessory.
* Connected with computer through CX-7412, or connected withLAN through interface.
* Connected with CMS through PSTN, support 4+2, CONTACT ID.
* Programming through keypad or remote programming.
* Support wireless expansion function: 2 wireless receiver, 112 wireless detectors or buttons, 5 wireless keypads.

BUS system Intelligent Wired Alarm System CX-7448>Parameter:

BUS system Intelligent Wired Alarm System CX-7448>accessory:
?

*Working independently, or connected with CX-7448 BUS
*6 alarm input zones, 1 alarm relay output, 2 solid output and key switch; support 1 master * code, 3 user code, 1 duress code and 1 door code
* Support wireless receiver, wireless remote controller and wireless detector
* LCD displaying operation instruction and sensor status
* Bus output
?
→Single zone expansion module CX-7401/2
* DIP or single address code module
* High stability
* Directly connected bus, static current 50 UA
* Fit for perimeter alarm sysem

→8 zones expansion module CX-7408
* 1.6m away from CX-7448 Bus
* Power from control panel or dependently
* Static power consumption 10MA
* Work power DC12V

→CX-32B 32 Relay
CX-32B is a 32 relay output appliance, when CX-7448 could not meets requirement, use CX-32B. There are two ways of connection with CX-7448 alarm system: connected with CX-7448 main board, or connected with computer
LED indicator
When the system works normally, LED lights. When outputting signal trigger a relay, the relative LED will light
?
?
BUS system Intelligent Wired Alarm System CX-7448>Output setting
Alarm output from each zone can be controlled by jumper, the method is as follow:
One to one: No.1 zone alarm, it trigger relay 1
One to more: No.1 zone alarms, relay1, 3, 5 will be activated
More to one: No.1, 3or 8 alarm, one relay