Sell Cranking Radio Flashlight

Model No.:WD-3063
Product Origin:China
Brand Name:
Price Terms:
Payment Terms:
Certification:
Description:Characteristic of the products (WD-3063) Main technical parameters: 1) Lighting: a) With 1 LED, maximum brightness: 20,000mcd, maximum light flux: 1.9lm b) With 5 LEDs, maximum brightness: 70,000mcd, maximum light flux: 6.9lm c) After cranking for 1 minute, LED bulb can be turned on 80 minutes and 5 LEDs 40 minutes 2) Mobile phone charging: a) Output voltage: 5.7V/6.4V b) Maximum output current:>=400mA c) Maximum output power: 2.5W d) Charging 3 minutes can provide 2-8 minutes of talk time 3) Radio: a) Radio frequency range: FM88~108MHz, FM76~92MHz b) 1 minute of cranking charge can make radio last for 7 minutes 4) Application life: a) DC jack: 5,000 times b) Earphone jack: 5,000 times c) Switch: 10,000 times d) LED bulbs: 100,000 hours e) Plastic parts: 5 years f) Life span as a whole body: 5 years Use: 1) For lighting a) Lift up the handle, hold the unit with one hand and crank it with another hand at the speed of 2.5-3 cycles per second for about 1 minute, then press the button for lighting b) Switch mode: press first for 1 LED on, second for 1 LED off, third for 5 LEDs on and forth for 5 LEDs off 2) For charging a mobile phone a) Open the DC cap, insert the cable head with "DC" mark into the DC hole and the other end to a suitable mobile phone or a intermediary plug b) Lift up the handle, hold the unit with one hand and crank it with another hand at the speed of 2.5-3 cycles per second, the mobile phone indicates charging effect on screen 3) Radio: a) Pull out the antenna, turn the power switch clockwise, a crack sound will heard to show power on b) Press the reset button to lock the frequency at the lowest end, then press the scan button to search a wanted channel automatically. If press the selection button several time but no channel can be locked, please press the reset button to start over c) Volume adjustment: turn clockwise to increase volume, otherwise to decrease volume d) Speaker switching: open the DC cap, insert earphone plug into the earphone hole and the speaker is cut for the earphone work. Withdraw the earphone plug, the speaker comes to work again e) Turn off radio: rotate the volume switch counterclockwise until a crank sound to be heard to shut off power