OP-COM Car Diagnostics Tool

OP-COM is a PC based diagnostic program for OPEL CARS, support CAN BUS

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and
supports remote, and key programming.

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling
module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB
converters.The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed
CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is
available for CAN-BUS.

Compared to the TECH2, which is the dealers tool (with a 32 MB card+CANdi interface), the price of OP-COM is quite affordable.
Not to mention the free software updates, which can be downloaded from the internet.

With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking, or alarm. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
You will need the vehicle security code, which can be found on the CAR-PASS. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
You can code SAB6, and SAB8 airbags with the software.

OP-COM is under continous development, new version will be availabe approximately every 3-4 month.OP-COM is currently available in English

For more details info.of the OP-COM kindly refer to
OP-COM details

IMPORTANT: The program can only be used with a special interface hardware. A simple serial or USB port based standard interfaces (K, KKL, etc) cannot be used!