Product Introduction

DLX-E1E 10/100M to E1 Protocol Converter is a conversion device that can realize the conversion from 10/100Base-T interface to E1 interface. Provides 2048Kbit/s data transmission channel for line concentrator or exchanger to combine two LANs into one LANs via transmission apparatus (such as optical transmitter/receiver and so on) and use same IP address. Supports automatic learning MAC address function. Filtrate data package via address list and be transparent in TCP/IP protocol.

Product Feature

● Adopts large-scale integrate chip, brief circuit, low power consumption and high reliability structure

● Offers 1-8 channel E1 port and Automatically adapt to 75ohm & 120ohm Impedance

● Master clock, incept resume clock optional

● Provides powerful network management functions

● Possess complete alarm and status indication function

● Adopts manifold power supply: -48V DC or 220V AC

Technologies reference

● Interface type: E1, 10/100Base-T

● Bit rate: 2048KBIT/S±50ppm

● Transmission end rate: 2048Kbit/S

● User end rate: 10/100Mbit/S

● E1 impedance: 75ohm(unbalance)/120ohm(balance)

● Clock type: master clock, slave clock optional

● Power

Voltage:180V~240V AC,-36V~-72V DC

Power consumption: <5W

● Working environment:

Operating temperature: 0℃~50℃

Storage temperature: -40℃~70℃

Environment humidity: 5~90%(non-condensing)

Atmospheric pressure: 86~106KPA

● Dimension: 200mm×140mm×35mm

● Indicator:

PWR: Power Indicator

LINK: Ethernet Connection Indicator

WTX: WAN Send Data Indicator

WRX: WAN Receive Data Indicator

LTX: LAN Send Data Indicator

LRX: LAN Receive Data Indicator

LOS: E1 Signal Indicator

COL: LAN Signal Indicator
ERR: Wrong Code Indicator