stainless steel 316 300mesh printing screen

stainless steel 316 300 mesh printing screen

300 Mesh Stainless Steel Printing Screen

Stainless Filter Cloth , Steel Filter Cloth

Stainless steel wire mesh printing screen requires square opening and high permeation. The screen mesh has flat surface without joint knots,uniform opening ,acid-resistant,alkali-resistant,high lasting strength will not be affected under ultra-violet radiation.Stainless steel printing screen is also known as super-thin wire cloth.
 

Features:
1. High tension: Much higher tension than common polyester mesh,and this property is very stable;
2. Super Precision: Uniform wire diameter and aperture with extremely low difference;
3. Low Elongation:Very small elongation of wire mesh at high tension;
4. High Corrosion Resistance:The excellent corrosion resistance of stainless steel wire exceeds polyester fiber.
5. Non-electrostatic:To avoid affects of nonelectrostatic for printing and ensure the safety of printing;
6. Good Heat-melting Resistance: Special features of steel wire mesh,suitable for heat-melting ink;
7. Good Solvent Resistance: To avoid the affects of any solvents to wire mesh and to ensure the safety of printing.
 

Specification:
1. Mesh: 300
2. Wire diameter: 0.03mm
3. Open area:41.7%
4. Aperture micron: 55 μm
5. Thickness: 66-68μm
6. Calendered thickness: 51μm
7. Width: 100cm,122cm
8. Theoretical ink: 28.0m³/m²
9. Tension: 40-45N/cm

Application:
      Stainless steel printing screen are widely used in the plate making of electronics,textiles,ceramics,glass and other industries and filtration of aviation,airspace and petrochemical industries.It is widely used in the printing of Chip Electrical Components,Solar Battery,FPD,LCD,Glass,PCB and ect.