ultrafiltration mineral water equipment

Brand:ChuanYi

Place of origin:Shandong China(mainland)

MOQ: 1 set

Place of origin:Shandong China(mainland)

Attention:

1. The ultra-filtration must be worked under the set pressure and temperature, if not it would be broken up with hyper pressure and the over temperature.

2. Because be membrane interception substance in the membrane surface deposition, the ultra-filtration rate and interception will be decline. So the ultra-filtration device should be cleaned by isobaric pressure flushing,back washing and chemical cleaning.

3.Due to process solution on membrane fouling at different levels, the actual filtering solution ultra-filtration rate much lower than the factory calibration rate, therefore ultra filtration for special solution processing membrane design ultra-filtration rate should be determined according to the test.

4.  When operating must maintain steady lifting pressure, sudden lift pressure makes resin sealing head deciduous or fiber breakage.

During the ultra-filtration work process, the separation of substances and other impurities will gradually deposited on the membrane surface, causing pollution and congestion on the membrane, the ultra-filtration membrane cleaning is indispensable ultra-filtration steps, membrane cleaning is to extend the effective an important means of membrane life. Methods of membrane cleaning include chemical cleaning and physical cleaning.