PON FTTx/MDU OTDR—FTB-730

Applications

· FTTx/MDU test challenges within PON networks

· Access network testing

Key Features and Benefits

· Test through high-port-count splitters (up to 1x128)

· Singlemode port for in-service troubleshooting

· Dynamic range of up to 39 dB

· Short acquisition time to speed up deployment process

Optimizing Passive Optical Network (PON) Testing 

Designed to meet testing requirements brought by FTTH networks in general, and PONs/MDIs in particular, the FTB-730 enables testing at 1310, 1490, 1550 and 1625/1650 nm. What’s more, EXFO’s next-generation OTDR software lets you test through high-port-counter splitters—even 1x64 splitters—with loss levels of up to 21 dB. 

In-Service Troubleshooting

The flexibility to add a single mode live testing port for in-service troubleshooting enables you to fix problematic distribution fiber while the others are still active. Its filtered port blocks incoming transmission signals and its out-of-band wavelength will not interfere in your network. Maintaining an excellent quality of service (QoS), it will ease the troubleshooting testing steps. 

EXFO’s OTDR Software: Boosting Productivity in the Field

Auto and Advanced Modes: Choose Your Testing Approach

Streamline data acquisition in the field and report generation back at the office with EXFO’s powerful OTDR software. Choose from two testing approaches: Auto mode or Advanced mode.

Advanced Mode: Flexibility for Experts

For complete control over your test routine, select the Advanced mode. Manually set all acquisition parameters, including the index of refraction (IOR) and helix factor. Save time and get better results by fine-tuning acquisition parameters on the fly.

Auto Mode: One-Touch Testing

Ideal for basic, repetitive applications, the Auto mode shortens the learning curve for new OTDR users.

· Preset test parameters

· Choice of single- or dual-wavelength OTDR testing

· Convenient one-step event table

General OTDR Software Features

Great Display Legibility for Outdoors Work

For installation and maintenance crews, working outdoors goes with the territory. Switch between black and white display backgrounds as needed, and enjoy great legibility, even in the brightest daylight. Plus, the FTB-1 Platform’s 7 inch landscape screen is adapted for OTDR trace analysis.

Smooth Data Management

This feature combines file autonaming with subset cable and fiber incrementation.

FTB-1 Platform Software Test Tools

This series of platform-based software testing tools enhance the value of the FTB-1 platform, providing additional testing capabilities without the need for additional modules or units.

EXpert Test Tools

EXpert VoIP Test Tool

The EXpert VoIP Test Tools generates a voice-over-IP call directly from the test platform to validate performance during service turn-up and troubleshooting.

· Supports a wide range of signaling protocols, including SIP, SCCP, H.248/Megaco and H.323

· Supports MOS and R-factor quality metrics

· Simplifies testing with configurable pass/fail thresholds and RTP metrics

EXpert IP Test Tool

The EXpert IP Test Tools integrates six commonly used datacom test tools into one platform-based application to ensure field technicians are prepared for a wide-range of testing needs.

· Rapidly perform debugging sequences with VLAN scan and LAN discovery

· Validate end-to-end ping and traceroute

· Verify FTP performance and HTTP availability

Third-Party Test Tools

Wireshark

This live-network packet capture utility makes it possible to look “inside” the packets and obtain data such as transmission time, source, destination, protocol type, etc. Users can then diagnose a problem or root out suspicious behavior. Wireshark is a standard utility on all FTB-1 platforms.

JPerf

This TCP performance testing tool can create TCP and UDP data streams which measure the throughput of a network that is carrying them. Thanks to various user-definable parameters, technicians can rely on JPerf to optimize or tune a network under test.

NetStumbler

NetStumbler verifies wireless network configurations, enabling field techicians to identify areas that have poor coverage or wireless interference, and helping them to aim antennas for full effect and find unauthorized access points.