Sell GPRS / GPS Unit For Fleet Management Applications (track Locate) (Spain)

ARGOM TRACKER M310 (GPS-GSM-GPRS) The ARGOM M310 is a GSM-GPRS modem with GPS integrated on board which is able to get device coordinates and transfer them via GSM or GPRS. This device is perfectly suitable for applications where location acquirement of remote objects is needed. So you can track your remote objects (trucks, cars, ships etc) quickly and easily. It has rechargeable battery inside and special controller for power management. Thus it can operate for 3 to 6 hours without external power supply. Also this device supports a lot of connection types, so you can choose one according price, reliability, speed or ease of use. This GPS/GSM unit is an open architecture device, which is fully programmable. M310 can perform tasks on remote objects, such as monitoring fuel tank level, engine status, or controlling truck door etc. ALL THESE OPTIONS CAN BE OFFERED AS STANDARISED ACCESSORIES. In case of losing connection M310 can store data up to 1 week, and once the connection is established the device will send stored data via GPRS. So you won?t lose your data (coordinates, fuel tank level etc.). The aluminium case of the device is very robust and perfectly suitable for installation into harsh environment. MAIN FEATURES - Track your remote objects (trucks, cars, ships etc) quickly and easily. - The device supports the following GSM bearers: - EDGE class 6 (up to 177,4 kbps); - GPRS class 10 (up to 85,6 kbps); - HSCSD (up to 43,2 kbps); - CSD (up to 14,4 kbps); - SMS (text/data) - USSD (data). As a lot of connection types are supported, you can choose one according price, reliability, speed or ease of use. - Dual-band modem - European (and Asian) version - 900 MHz / 1800 MHz. - American version - 850 MHz / 1900 MHz. - The aluminium case of the device is very robust and perfectly suitable for installation into harsh environment such as cars, trucks, boats or other moving objects. - Internal rechargeable battery with charge controller. - M310 has 3 digital inputs, 3 digital outputs and 3 analogue inputs, which could be used for performing tasks on remote objects, such as monitoring fuel tank level, engine status, or controlling truck door etc. ALL THESE MEASURE EQUIPMENT CAN BE OFFERED AS STANDARISED ACCESSORIES - M310 has 1-Wire Dallas I/O protocol integrated for temperature measuring or key identification. - M310 has RS232 port which could be used for external peripheral data acquire. - M310 is an open architecture device, which is fully programmable, so if you want to perform a very special task, you can totally adapt the device for your needs by writing your own Java IMlet or asking our technical staff to make it for you. TCP/IP and UDP stacks are integrated. - AutoPIN feature enters the PIN code each time the device is turned on, while SIM card is still protected with code.