Portable Coating Thickness Gauge CM-1210A F&NF 0~2000 um / 0~80 Mil

Applications：    

The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on magnetic materials (e.g. iron, nickle etc.) . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.The N probes measure the thickness of non-conductive coatings on non-magnetic metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magnetic stainless steel, etc.

  * Two measuring methods: magnetic induction (F) and eddy current (N)
* Two measurement mode: Single and Continuous（Notice：Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.）
* Metric/imperial system selectable.

* Manual or automatic shut down.

* Auto memory of calibration value,and auto recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with PC.

* Provide “Bluetooth ? data output” choice.

* Separate Type can provide several type probe, measure can be more flexibility.

Operating Principle   ：  Magnetic Induction / Eddy Current (F / NF)    

  Measuring Range   ：  0~2000 um / 0~80 mil    

  Resolution   ：  0.1 um / 1 um    

  Min. Radius Workpiece  ： F Type: convex 1.5 mm / concave 25 mm NF Type: convex 3 mm / concave 50 mm    

  Min. Measuring Area    ：  6 mm    

  Min. Sample Thickness    ： 0.3 mm    

  Accuracy   ；    ± 1~3%n or ± 2.5 um     

  Auto Power Off    

  Metric / Imperial    :   Convertible    

  Battery Indicator   :    Low Battery Indicator    

  Operating Conditions     :  Temp. 0~40 °C, Humidity: 10~90 %RH    

  Power Supply   :    4 x 1.5 V AAA (UM-4) Battery    

  Dimensions    :   140 x 72 x 34 mm ( 5.5 x 2.8 x 1.3 inch )    

  Weight    :   215 g (Not Including Batteries)    

Standard Accessories:

 1. Main Unit

 2. Probe (F Type & NF Type)

 3. Calibration Base Set (F Type / NF Type) CTG-BS

 4. Calibration Foils CTG-CF (1 set, 4 pieces)

 5. Carrying Case

 6. Operation Manual

Optional accessories:

 1. USB, RS-232C data cable with software
 2. Bluetooth data out put with software