Auto COB Pick and Place Machine

Features:
1.This machine is designed for precisely implanting the chips onto chip fixing hole in PVC sheet automatically after antenna embedding.
2.Put chips on vibrating plate, which will revise and convey IC in fixed place.High-precise dual-axles are controlled by PLC to pick and place the chips on X/Y plane.
3.This machine is automatically controlled by PLC program and operated by wide and friendly interface, rationalization and humanization, easy to operate and maintain .
4.The locating parameter of each module can be adjusted individually, ensure the accurately of the implanting position .
5.Double working platforms can work at the same time or separate, with high production efficiency, and the layout size of material can be flexibly selected.
6.Photoelectric sensor is used to monitor and control the chip feeding. Machine will alarm and stop automatically when errors happens.
7.It can be used for taping type or gluing type, which can be selected by the client. Chip placing and gluing operate at the same time.
8.The direction of chip can rotate before implanted automatically, it can mount the chip both front or back side .

Machine Spec:

1.Dimension: L1780*W1180*L1600mm
2.Weight: About600kg
3.Power Source: AC220V 50/60HZ 25A
4.Power: Around 3.0KW
5.Compress Air: 6 kg/cm2
6.Air Consumption: 30L/min
7.Control Method: Servo System + PLC control
8.Placement Accuracy: ±0.05mm
9.Operator: 1 person
10.Output: About 5500pcs/h
11.Material Specification: Standard Module,PVC.ABS,PETG etc.