Silica gel ESD Wrist Strap

Place of Origin	Guangdong, China		Brand Name	Purestat
Model Number	WS-001-1008

Specifications

1. Material: PU, Copper, Silica Gel
2. Feature: Good Static Dissipative Ability
3. Strengths: Easily adjustable

 

 

 

 

 

ESD Wrist Straps, also known as Antistatic Wrist Straps, are used to prevent electrostatic discharge (ESD) by safely grounding a person working with electronic equipments or at an electronic assembly facility. They are usually used in conjunction with an ESD mat on the workbench, or a special static-dissipating plastic laminate on the workbench surface.  

 

Prodauct description:

Silica Gel Wrist Strap is composed of silica gel wrist loop and grounding wire, the gel wrist loop contact with skin directly, sand form an anti-static channel together with hardware plate and dual coil core buckle connection, this channel 

transfer away static from skin.

Coil core is made of circling wire, space minimum occupied, and has good retractility. Every ground coil core has safety 1MΩ resistance, it protects operators safety as well as current-sensing devices.

 

 

Main material:

1. Plastic piece material: ABS (sky-blue) 

2. Catapult wire material: PU (sky-blue)) 

3. Catapult wire core: 7 root copper-foil silk 

4. Fastener material: Cu (nickel-plate) 

5. Conduction strap material: Silica Gel 

6. Four petal banana pin: High quality beryllium-copper

 

General Parameters:

1. Discharge period: <0.1S (1000V~100V)

2. Buckle pulling-out force: F>0.45Kg (1Pound), F<2.3Kg (5Pounds)

3. Elongation of coil wire: can elongate at 80% of its total length

4. Wrist band inner side surface resistance: ≤1KΩ

5. Dual coil core safety resistance: 1MΩ±5%

6. Dual coil core bending times: 2003320 times

7. Dual coil core hanging force: 13.61 Kg(30Pound)

8. Plug life span: ≥10000 times

9. Plug pulling-out force: F≥454Kg (11Pound)

10. The diameter of Snap is 10mm, the cord length is 8 inch

 

  

 

Usage Instruction:

1. Place the wristband of the anti-static wrist strap around your bare wrist.

2. Secure the wristband so that the metal plate on the inside of the band is firmly pressed against the underside of your arm. The metal plate should have as much contact with your skin as possible, so place it in the spot where you have the least amount of hair.

3. Connect the strap to the wristband. The strap and wristband usually connect via a simple snap mechanism.

4. Clip the alligator clip on the end of the strap onto an anti-static mat or any bare metal surface that is touching the ground.